i dnt know
what is lathe machine in short answer
difference between lathe and drill machine doing full on piece of metal
Vertical milling machine is for cutting large pieces. The lathe cutting tool motion is perpendicular to the ground. They are said to Karosl lathe.
It can duplicate itself.
Milling in a lathe can be two things:A cutter is gripped in the chuck and a workpiece the the tool post. The work piece is then milled by using the feed on the lathe. Although it has been done, it is an unconventional method and is not recommended.A 3-in-1 lathe with a milling attachment as part of the machine used for milling a work piece.
loop checking is perform before cable termination..the difference between a close loop and open loop is,tha close loop has a feedback while the open loop has not.
closed loop system
non- examples of feed in lathe machine?
The system without feedback is known as open loop system. The examples of the open loop system are bread toaster, oven ,washing machine. The open loop systems are inaccurate & less complex.
yes
a washing machine consider as an open loop system when all the disturbances being ignored e.g when the operator try to start the washing machine it goes start even though it don't have water inside the washing machine.
There is no difference between a turning machine and a lathe. They are two names for the same kind of machine
what is lathe machine in short answer
difference between lathe and drill machine doing full on piece of metal
difference between lathe and drill machine doing full on piece of metal
Vertical milling machine is for cutting large pieces. The lathe cutting tool motion is perpendicular to the ground. They are said to Karosl lathe.
lathe machine, power depends on the size and power of electric motor and gearbox lathe.