Typically. I assume the salt is used for melting ice? Although exterior concrete is designed to resist damage from salt and freeze/thaw cycles, these will always shorted its life span. Better to just shovel the walk.
yes
Salt can ruin concrete by accelerating its deterioration through a process known as freeze-thaw cycling. When salt is applied to concrete, it lowers the freezing point of water, leading to increased water infiltration. During freeze-thaw cycles, the water expands when it freezes, causing internal pressure and cracking in the concrete. Additionally, the chemical reactions between salt and the concrete can lead to corrosion of reinforcing steel, further compromising the structure's integrity.
Yes, it may take several years until it is noticeable depending on how much and how often it is used. If you notice pitting or sparring that is the first signs of damage. There are alternatives to salt for walkways and driveways that are "safe for concrete surfaces" but you will pay a premium for these products.
Yes as the rusts will still develop if the concrete slab still moist. The strength is not as good as the good mesh.
The atmospheric moisture is absorbed by the surface of masonry, flooring, or concrete through the joints, voids, or cracks. When the same water is evaporated from the surface, it leaches the lime compounds and forms the formation of salt deposits on the surface of masonry, flooring, or concrete. It is known as efflorescence or saltpetering.
It would weaken the concrete, so keep out the salt.
Salt water can damage concrete by promoting the corrosion of the steel reinforcement within the concrete. When salt water penetrates the concrete, it reacts with the steel, causing it to rust and expand, which in turn causes the concrete to crack and weaken. Over time, this process can lead to degradation and structural failure of the concrete.
It is not recommended to use salt water to mix concrete as it can cause corrosion of metal reinforcements within the concrete, leading to structural issues over time. It is best to use fresh water for mixing concrete.
Concrete is corroded by salted water.
Water softener salt can be harmful to new concrete as it may promote efflorescence, which is the appearance of white, powdery substance on the surface of the concrete. It's best to avoid using water softener salt near new concrete to prevent potential damage.
yes
thats a bad idea to have an inground salt water pool in concrete. the salt water it self may eat away some parts of the concrete, plus the fact that its underground and contains salt it attracts worms. maybe you should pour alot of clorine in the pool to kill them, then empty out the water and start fresh.
there is no possible way of removing salt from concrete. it has embedded itself inside and causes more damage than rebar deteriation acids -sweep as much salt as you can away from concrete and do not wet it-salt crystallises everytime you wet it-its like freezing water over and over again -breaks down concrete-email me chris.cmworks@gmail.com-
Salt never goes bad.
Salt can ruin concrete by accelerating its deterioration through a process known as freeze-thaw cycling. When salt is applied to concrete, it lowers the freezing point of water, leading to increased water infiltration. During freeze-thaw cycles, the water expands when it freezes, causing internal pressure and cracking in the concrete. Additionally, the chemical reactions between salt and the concrete can lead to corrosion of reinforcing steel, further compromising the structure's integrity.
Passing salt was not bad luck. Spilling salt was bad luck because in Roman days, salt was very expensive.
Tamping rock salt into wet concrete can create a textured surface when the salt dissolves and leaves voids. However, it can also cause durability issues by creating pathways for water to penetrate the concrete, leading to potential cracking and spalling over time. It is generally not recommended for structural concrete applications.