answersLogoWhite

0

Remains constant

Normal stress = F/a K = F/a/V/V = -FV/aV

If p represents the increase in pressure applied on the spherical body then F/a = p

k = -pV/V

User Avatar

Wiki User

12y ago

What else can I help you with?

Continue Learning about Engineering

Formula for bulk modulus of volume of elasticity?

K(bulk modulus of elasticity)=-{[Pressure x volume]/change in volume}


What is the types of modulus of elasticity?

1. Young's modulus of elasticity, E, also called elastic modulus in tension 2. Flexural modulus, usually the same as the elastic modulus for uniform isotropic materials 3. Shear modulus, also known as modulus of rigidity, G ; G = E/2/(1 + u) for isotropic materials, where u = poisson ratio 4. Dynamic modulus 5. Storage modulus 6. Bulk modulus The first three are most commonly used; the last three are for more specialized use


What is the modulus of elasticity of water?

Pure de-aired water has a bulk modulus equal to approximately 2.2 GPa. There is a common misconception that fluids are totally incompressible, however as can be seen from the above this is not true (if it were, the bulk modulus would be infinitely high). It is reasonable to state that water is highly resistant to compression however. It should also be noted that the presence of dissolved gasses in water can significantly reduce this value so consider carefully the application or system being modelled before choosing an elastic modulus for water or any other fluid.


What is the difference between modulus of compression and bulk modulus and some special for compression?

Modulus of Compression is the ratio of stress to strain in an uniaxial compression action, while as, bulk modulus is the ratio of volumetric stress (hydrostatic pressure) to volumetric strain in hydrostatic loading. These two modulii are inter-related though and are written with the use of Poisson's ratio. 1/m = (3K-E)/6K 1/m = Poisson ratio K = Bulk Modulus E = Elastic Modulus Satisfied? - tell others, not satisfied? - tell me.


Relationship between bulk modulus and poissons ratio?

K=E/(3*(1-2v)) K: Bulk modulus E: young modulus v: poison's ratio on the other hand: delta V/V=(1-2v)*delta L/L relative change in Volume equals to: (1-2v) * relative change in length.

Related Questions

Formula for bulk modulus of volume of elasticity?

K(bulk modulus of elasticity)=-{[Pressure x volume]/change in volume}


What are the different types of modulus elasticity?

there are different types of modulus it depends on what types of stress is acting on the material if its direct stress then then there is modulus of elasticity,if tis shear stress then its modulus of rigidity and when its volumetric stress it is bulk modulus and so on


Bulk modulus of sulfuric acid?

The bulk modulus of sulfuric acid is approximately 3.15 GPa at room temperature. Bulk modulus is a measure of a substance's resistance to compression under pressure, indicating how much the volume of the substance will change when subjected to pressure.


From long process derive the expression for bulk modulus an ionic crystal?

The expressions that are derived are from isothermal bulk modulus and its pressure derivatives. The pressure varies to create the ionic crystal.


What is the bulk modulus of incompressible liquid?

The bulk modulus of an incompressible liquid is theoretically infinite, as it does not experience any volume change when subjected to external pressure. Since incompressible liquids are considered to have a constant volume, their bulk modulus is undefined.


What is bulk modulus steel?

Bulk modulus is a measure of a material's resistance to compression. For steel, bulk modulus refers to its ability to withstand changes in pressure without significant volume change. It is a measure of the material's stiffness and is an important property in engineering applications.


What is the Bulk modulus of oil MIL-L-23699?

The bulk modulus of oil can vary based on factors such as temperature and pressure. However, for oil meeting the MIL-L-23699 specification, the typical bulk modulus is around 1.8-2.0 GPa.


Solids liquids and gases. which ones are hard to deform?

When we talk about deformatation, we are referring to two properties, namely Elasticity and Plasticity. These properties are measured using constants known as " Moduli of Elasticity". There are 4 such moduli: Young's Modulus Axial Modulus Rigidity Modulus Bulk Modulus The larger the value of the Bulk Modulus, the harder it is to compress the material.


What is lame constants?

See Gabriel Lame (1795-1870). Also see Stress-Strain Relationships, Bulk Modulus, and Theory of Elasticity.


What is the types of modulus of elasticity?

1. Young's modulus of elasticity, E, also called elastic modulus in tension 2. Flexural modulus, usually the same as the elastic modulus for uniform isotropic materials 3. Shear modulus, also known as modulus of rigidity, G ; G = E/2/(1 + u) for isotropic materials, where u = poisson ratio 4. Dynamic modulus 5. Storage modulus 6. Bulk modulus The first three are most commonly used; the last three are for more specialized use


What is the bulk modulus of balsa?

The bulk modulus of balsa wood ranges from 1.1-1.5 GPa.


What is the bulk modulus of viscous material?

Viscous materials do not have a bulk modulus in the traditional sense because they do not deform elastically under pressure like solids. Instead, their behavior is more accurately described by viscosity and shear properties.