closest to the driver is the highest cylinder, also everyone should have a manual for their vehicle, and the library should have a professional shop manual available in the REFERENCE section...make copies of the right sections...good luck :)
A twin cylinder rotax 536 cc rotary valve motor
Front of motor there is a little indent could say something like b15dy it will be if your standing in front of the car look on the left hand side down about 6 inches
it means the model number , which is mentioned on the name tag on the motor top or on the side , depending on where the manufacturer puts it.
The number of pulls for an electric motor typically refers to the number of times the motor's rotor completes a full rotation or cycle during a specific period, often in relation to its operational performance. It can also indicate the frequency of electrical signals or inputs the motor receives, which can affect its speed and torque. Understanding the number of pulls helps in assessing the motor's efficiency and suitability for particular applications.
It depends on the motor. They can be purchased with different numbers of poles. The number of poles mainly changes the speed of the motor.
The number 4 cylinder is typically at the back of the motor while the number 1 cylinder is located at the front. This is done to minimize confusion and streamline the repair process.
The number one piston is always at the front side of the motor where the belts are. If it is a 4 cylinder. If it is a 6 cylinder its is always the 1st cylinder on the left side of the motor at the front where the belts are. Justin
Looking at the motor compartment from the front of the truck, the number one cylinder is the first on the left (passenger side)of the motor.
1st cylinder up front on the drivers side is #1.
If you are standing in front of your car and looking at the motor, the number one cylinder will be the one farthest to the right. If you are standing in front of your car and looking at the motor, the number one cylinder will be the one farthest to the right.
GM and Chrysler, it is the front driver side cylinder.GM and Chrysler, it is the front driver side cylinder.
The 1st one is on the passenger side standing in front of the motor.
On the 4 cylinder its at the front of the motor On the V6 its on the passenger side of the motor , front cylinder
YES - passenger side of engine , front cylinder
passenger side of engine , front cylinder FIREWALL 4 - 8 3 - 7 2 - 6 1 - 5 FRONT
Right side, front of motor. Front of car 3-1 4-2 Rear of car
It's a 6 cylinder Someone may have dropped an 8 cylinder GM motor in the car, that is a popular thing to do