answersLogoWhite

0

Two types of relays commonly used to start a single-phase compressor motor are the current relay and the potential relay. A current relay operates based on the current flowing through the motor, providing a boost to start it by engaging the start winding until the motor reaches a certain speed. In contrast, a potential relay uses the voltage across the start winding to activate and disconnect the start winding once the motor is up to speed. Both relays ensure efficient motor operation while protecting against potential damage.

User Avatar

AnswerBot

1mo ago

What else can I help you with?

Continue Learning about Engineering

What are the advantages of three phase induction motors over the other motors?

A Single phase induction motor includes a main winding, an auxiliary winding, a run capacitor, & a subsidiary star device. The auxiliary winding is configured such that the number of turns of the aauxiliary winding through which a current flows, varies according to the operating mode of motor. When the motor starts, the number of turns of the auxiliary winding through which a current flows is reduced there by increasing the start efficiency of the motor. when the motor runs in normal mode, the number of turns of auxiliary winding through which a current flows is increasing there by increasing the operations efficiency of motor


Genetic information that is found in a cell is called what?

I suppose it's really just called DNA, but in some singe-celled organisms, it's just simply DNA. The DNA is found in the nucleus of a cell.


How many amps does a 240 volt 7.5 hp motor draw?

whats the voltage??? at480 volts the Fla would be 33.75 or 35 amps. at 230 volts it would be 70 amps. i would go with the 480 myself because its less amps. <<>> The voltage stated in the question is 600 volts. There are 746 watts in 1 HP so in 20 HP there would be 746 x 20 = 14920 watts. I = W/E. 14920/ 600 = 24.8 amps. The proper formula to use would be I = HP x 746/1.73 x E x %Eff x pf. Without knowing the efficiency and power factor of the motor an accurate answer can not be given. In the trade, a quick rule of thumb is, for 600 volt motor installations, it is 1 amp per horsepower which is close enough to calculate the feeder wire size.


Related Questions

What type of motors are used for ceiling fan and table fan are they same?

They are the same and they use a singe-phase induction motor of 15-30 watts


What is an antonym for singe?

An antonym for singe is Quench.


What part of speech is singe?

"Singe" is a verb.


What is the feminin of singe?

The feminine of singe is singeuse.


What is monkey in French?

monkey in french is singe.


Was singe a lycan or a vampire in underworld?

Singe was a lycan


What is another word for to burn slightly?

singe


What is difference between singe and dual stage compressor?

a dual stage can run at low or high speed depending upon heat load, a single stage has only one speed.


Can you give a sentence for the word singe?

Please do not singe my shirt.


What does le singe mean in English?

Le singe means 'the monkey' in French.


What are the advantages of three phase induction motors over the other motors?

A Single phase induction motor includes a main winding, an auxiliary winding, a run capacitor, & a subsidiary star device. The auxiliary winding is configured such that the number of turns of the aauxiliary winding through which a current flows, varies according to the operating mode of motor. When the motor starts, the number of turns of the auxiliary winding through which a current flows is reduced there by increasing the start efficiency of the motor. when the motor runs in normal mode, the number of turns of auxiliary winding through which a current flows is increasing there by increasing the operations efficiency of motor


Sentence for singe?

The singe from the cigar ash destroyed the book report.