Yes, they should be as tight as you can get with a 6 inch long wrench
Experience. ----------------- If the bolt is horizontal : With weights, you can take a wrench of known length and knowing the torque needed, calculate the amount of weight needed to apply the proper torque to the wrench when it is horizontal. Otherwise you can only guess at it.
yes
the most accurate calibrated torque wrench was using the TWT torque wrench tester products that produce by Stahlwille. Its also called transducer.
There's a world of difference. A torque wrench is a hand tool used to tighten fasteners to a preset torque specification. An impact wrench is a power tool which uses power actuated hammers to tighten a fastener for high torque applications.
No, it is a device for setting torque.
In cases such as the cylinder head, a torque wrench. However most parts can be tightened up with a box wrench or socket.
finger tight then half turn with plug Socket, because most people don't have a torque wrench
A torque wrench is like a regular wrench - but with an indicator added. This indicator will tell you when you have tightened the nut/bolt to a certain degree, either by clicking or by a dial showing a certain value. You get the required torque setting from a manual or maintenance handbook.
A torque wrench should not be used on any hitch type.
Before torque wrenches you simply had to judge the amount of force you used by the 'pull' you exerted on the wrench.
Torque is not the type of bolt but a type of wrench used to tighten bolts. A torque wrench will tell you how tight a bolt is tightened like 60lb of torque or tighten to 80lb of torque so a bolt will be tight enough to stay in but not too tight that you strip the bolt.
Answer A torque wrench has a gage which indicates the amount of twisting pressure (torque) applied as the fastener is tightened. This ensures the proper amount of torque and consistency and is meant to prevent over- or under-tightening of the fastener great answer! often used on car tires
Experience. ----------------- If the bolt is horizontal : With weights, you can take a wrench of known length and knowing the torque needed, calculate the amount of weight needed to apply the proper torque to the wrench when it is horizontal. Otherwise you can only guess at it.
There are a couple of different tools that are good for tightening lug nuts. A torque wrench and a lug wrench are good for tightening lug nuts. Typically lug nuts would be tightened with a torque wrench, but a lug wrench is much cheaper.
The drain plug should be tightened to the manufacturer's recommended torque specifications. Over-tightening can strip the threads or damage the plug, while under-tightening can lead to leaks. It is important to use a torque wrench to ensure proper tightening.
as long as your extension is 90 degrees from the handle it will not affect your torque wrench. if you use a super long torque wrench you may lose a little torque in the extension it self but should not affect torque. an extension affecting the wrench in lenght like a crows foot will affect torque as long as your extension is 90 degrees from the handle it will not affect your torque wrench. if you use a super long torque wrench you may lose a little torque in the extension it self but should not affect torque. an extension affecting the wrench in lenght like a crows foot will affect torque
I usually tunk 'em all down with a speed wrench until they touch the shoulder and then get out the torque wrench.