answersLogoWhite

0

Experience.

-----------------

If the bolt is horizontal :

With weights, you can take a wrench of known length and knowing the torque needed, calculate the amount of weight needed to apply the proper torque to the wrench when it is horizontal. Otherwise you can only guess at it.

User Avatar

Wiki User

11y ago

What else can I help you with?

Continue Learning about Engineering

Does loosening a bolt with a torque wrench hurt the torque wrench?

yes


What kind of stress is developed in bolt when nut is tightened?

Torque on a bolt places the bolt in Tension. The stresses are tensile stresses. There can also be torsional stress in the bolt, which is detrimental. That is minimized by lubricating the threads first, with anti-seize, thread locker (before cure), or surface treatment of the threads. In some cases, it is standard practice to back off nuts slightly after torquing to relieve the torsional stress.


What is crank pin bolt inspection procedure?

The crank pin bolt inspection procedure involves several key steps to ensure the integrity and safety of the bolts used in machinery. First, visually inspect the bolts for any signs of wear, corrosion, or deformation. Then, use a torque wrench to verify that each bolt is tightened to the manufacturer's specified torque value. Additionally, perform a magnetic particle or dye penetrant test to detect any cracks or flaws in the bolts, ensuring they meet safety and performance standards.


Which is stronger between a rivet and a bolt?

A riveted connection requires much more force to break the connection than a bolted connection. Furthermore, a bolt can become loosened by vibration which is highly unlikely in a riveted connection. Therefore, a bolt is weaker than a rivet.


How torque amplifier works?

A torque multiplier increases the torque by increasing the length from which a bolt or nut is turned. This process is referred to as "mechanical advantage."

Related Questions

Where are the torque bolts on a 1993 Olds Cutlass?

Torque is not the type of bolt but a type of wrench used to tighten bolts. A torque wrench will tell you how tight a bolt is tightened like 60lb of torque or tighten to 80lb of torque so a bolt will be tight enough to stay in but not too tight that you strip the bolt.


What is the proper torque specification for tightening a bike wheel bolt?

The proper torque specification for tightening a bike wheel bolt is typically between 30-40 Newton meters. It is important to use a torque wrench to ensure the bolt is tightened to the correct specification to prevent damage to the wheel or hub.


What is the proper torque specification for tightening the handlebar stem bolt on a bicycle?

The proper torque specification for tightening the handlebar stem bolt on a bicycle is typically between 5-7 Newton meters. It is important to use a torque wrench to ensure the bolt is tightened to the correct specification to prevent damage to the components.


What is the proper torque specification for tightening a bike stem bolt?

The proper torque specification for tightening a bike stem bolt is typically between 5-7 Newton meters. It is important to use a torque wrench to ensure the bolt is tightened to the correct specification to prevent damage to the bike or injury while riding.


Why does the crank arm bolt keep coming loose?

The crank arm bolt may keep coming loose due to insufficient tightening or improper installation. It is important to ensure that the bolt is tightened to the manufacturer's recommended torque specifications using a torque wrench to prevent it from loosening during use.


To what torque must the bolts on the head of a 2000 Hyundai accent be tightened?

to what torque must the bolts on the head of a 2000 Hyundai accent be tightened?


When a nut is tightened on a bolt the nature of stress developed in the bolt is?

It is torsion and tension while tightening, and pure tension when tightened


How do you used torque wrench?

A torque wrench is like a regular wrench - but with an indicator added. This indicator will tell you when you have tightened the nut/bolt to a certain degree, either by clicking or by a dial showing a certain value. You get the required torque setting from a manual or maintenance handbook.


How can you measure the torque by hand?

To measure torque by hand, you can use a torque wrench, which is a tool that allows you to apply a specific amount of force to a bolt or nut. The torque wrench will indicate the amount of torque being applied, usually in units like foot-pounds or Newton-meters. Simply adjust the torque wrench to the desired torque setting, then apply force to the bolt or nut until the wrench clicks or signals that the correct torque has been reached.


What is a torque wrench?

A torque wrench is a specialized tool used to apply a specific amount of torque to a fastener, such as a bolt or nut. It ensures that the fastener is tightened to the manufacturer's specifications, which is crucial for safety and performance in mechanical applications. Torque wrenches come in various types, including click, beam, and digital models, each providing a way to measure and control the torque applied. Proper use of a torque wrench helps prevent over-tightening or under-tightening, which can lead to equipment failure.


What is the head bolt torque specs for a 88 trx350d?

The head bolt torque specifications for a 1988 Honda TRX350D are typically around 22 ft-lbs (30 Nm) for the initial torque. The bolts should be tightened in a specific sequence and may require an additional angle torque method for final tightening. Always refer to the manufacturer's service manual for the most accurate and detailed specifications and procedures.


What tool tightens a cylinder head bolt?

A torque wrench is the tool used to tighten a cylinder head bolt. It allows the mechanic to apply a specific amount of torque, ensuring the bolt is tightened to the manufacturer’s specifications. This is crucial for maintaining proper clamping force and preventing engine damage. Using a torque angle gauge may also be necessary for certain applications to achieve the correct final tightening angle.