0
The profile of fine screw thread can be checked by using .........?
Wiki User
∙ 8y ago
Use a thread gauge to find the number of threads on a bolt. A thread gauge is several comb-like plates, each plate is marked with the number of threads the gauge fits. Search the internet using thread gauge for examples of what thread gauges look like.
Wiki User
∙ 8y ago
Add your answer:
Earn +20 pts
What is the disadvantage of a screw with larger thread spacing?
The larger thread spacing has 2 disadvantages: It is not a strong since it has less effective area; and if you are using to precisely locate something there is less precison per turn.
Is main method a thread?
No, Main is not a daemon thread in Java. its a non daemon or user thread. Also any thread stem from Main will be non daemon because daemon is derived from parent Thread status.
How does thread synchronization occur in a monitor?
by using synchronized class
How do you loosen shower faucet handle screw?
This depends, as some faucet handles have a screw inside which is taken out using a flat or star headed screwdriver, while other types have a grub screw which is taken out using an Allan key.
If Runnable interface is better than Thread class than why you are using Thread class What is the need for Thread class?
Though implementing Runnable interface is better approach than inheriting from Thread class but there are certain methods available in Thread class like join,sleep or yield which does not available in Runnable interface and programmer can not use them unless he has object of Thread class. This is why we should have Thread class Object. Rupesh Raghani
What is the disadvantage of a screw with larger thread spacing?
The larger thread spacing has 2 disadvantages: It is not a strong since it has less effective area; and if you are using to precisely locate something there is less precison per turn.
How is a screw related to an inclined plane?
On a screw, the threads are basically inclined planes, but facing down to help guide the screw into the wood. Using the inclined plane on the threads increases the time it takes rather than a nail, but it takes less energy to do it.
Why feed rod is using in the engine lathe?
The feed rod transmits power from the headstock to the carriage for feeding operations.The lead screw transmits power from the headstock to the carriage for screw thread cutting operations. On some lesser types of lathes the feed rod and the lead screw are used for both the feed and the screw cutting power transmission.
What is profile measurement using profile projector?
The profile measurement using a profile project gives the accurate length of a given a profile. A profile projector provides a very accurate profile measurement of the same.
How do you get my halo profile back on my new 360?
The profile is your gamer profile. If you are not using the gamer profile you had your halo stats on, there is no way to transfer them. If you are using the same profile, your data is lost.
How do you remove a broken crankshaft sensor that is flush with the bell housing on a 2003 dodge grand caravan?
Using an angle drill, drill a small hole in the sensor. Thread a screw in the hole, and use it to pull the sensor out.
How is a screw constructed?
When we make the male thread, generally we use a die tool. When we make the female thread, we use a tap tool. If we do not have the suitable tools, we can also make the thread using a lathe. When we make the threads using the tap or the die, care should be taken in respect for the following. (1) Start the thread with a perpendicular positioning of the tap or the die. (2) Turn the tap or die in quarter turns and "back off" quarter turns to remove metal chips so that they don't clog the tool. (3) Always use a cutting oil.
What is a sentence using the word thread?
I am having a bit of difficulty with putting this thread through the eye of the needle. You haven't a thread of evidence!
Can you install a plastic fitting on a galvanized pipe?
Yes, first the Galvanized pipe has to be threaded with a standard thread for pipes, then you buy the correct female socket threaded plastic fitting, screw it onto the pipe using Thread pipe sealing tape, then glue your piping into the socket part of the plastic fitting, simple. Cheers.
What is a sentence with thread?
I sewed a button onto my shirt using a needle and thread.
How do you get it in?
If it is a screw, you drill a hole first then insert the screw using a screwdriver.
Is main method a thread?
No, Main is not a daemon thread in Java. its a non daemon or user thread. Also any thread stem from Main will be non daemon because daemon is derived from parent Thread status.
