0
What else can I help you with?
How does the anode voltage applied to the cathode ray oscilloscope affects the sensitivity of the CRO?
The anode voltage does not affect the sensitivity of a CRO. The input amplifier and deflection circuit have a greater influence. The Anode voltage will affect the focus and visibility of the trace, in this respect it will affect how you see the result.
What is Saturation voltage of bjt?
It is the CE (collector - emitter) voltage at a given collector current when the transistor is fully on. Increasing the base current will not lower the CE voltage any more once saturation has been reached.
Can a silicon diode be forward biased if the anode voltage is negative?
To be forward biased any diode (e.g. vacuum tube, crystal, junction, point contact) must have its relative anode voltage more positive than its cathode voltage. If the absolute anode voltage is negative but the cathode voltage is even more negative, then the diode will be forward biased. But as your question made no mention at all of the cathode, I cannot tell if this is the case or not.
Is the amount of space charge created at the cathode is primarily controlled by the tube current?
The cathode space charge is determined by the voltage on the filament.
What would be the total voltage in a circuit that has two 6 volt batteries connected in series?
4 amperes. The voltage adds when batteries are connected in series. If they are the same voltage then the voltage doubles. Using Ohm's law: V = I*R with the voltage doubling and resistance being the same you get I = 2V/R and where V/R was your initial current you get I = 2*2ampers = 4 ampreres
Can you call forward bias voltage as positive voltage?
it is not necessary that always positive voltage should act as a forward bias voltage , it is the potential difference between cathode and anode that makes it forward or reverse biased .it the anode(p- doped material) positive with respect to cathode(n- doped material) --> forward biasedit the anode(p- doped material) negative with respect to cathode(n- doped material) --> reverse biasedex.anode - 5v cathode - 3vanode - 1v cathode - -2vboth the examples are forward biased.
Compare an anode and a cathode?
The Anode (+) is what you connect the positive voltage to The Cathode (-) is what you connect the negative voltage to.
What is Collector Emitter saturation voltage?
Collector-emitter saturation voltage refers to the voltage drop across the collector-emitter junction of a transistor when the transistor is in saturation mode. It is the minimum voltage required to keep the transistor in saturation, where the transistor is fully turned on and conducting maximum current.
How does the anode voltage applied to the cathode ray oscilloscope affects the sensitivity of the CRO?
The anode voltage does not affect the sensitivity of a CRO. The input amplifier and deflection circuit have a greater influence. The Anode voltage will affect the focus and visibility of the trace, in this respect it will affect how you see the result.
Is less than or greater than zero external voltage applied on diode when you deal with forward biased?
A forward-biased diode has a positive DC on its anode with respect to its cathode.
What is happening to the voltage value of scr if its gate is triggered?
the anode-cathode voltage drops
What happens to voltage as you move the anode and cathode closer in a fruit battery?
the voltage will go down when the anode and cathode are closer together but will go up when they are further apart
What is Saturation voltage of bjt?
It is the CE (collector - emitter) voltage at a given collector current when the transistor is fully on. Increasing the base current will not lower the CE voltage any more once saturation has been reached.
Why cathode rays are negatively charged?
Cathode rays are negatively charged because they are composed of electrons, which have a negative charge. When a high voltage is applied to the cathode in a vacuum tube, electrons are emitted from the cathode and accelerated towards the anode, creating a beam of negatively charged particles known as cathode rays.
The electrode attached to the positive terminal of a voltage source?
cathode
If the cathode voltage of a forward biased silicon diode is 4.5 v what is the anode voltage?
The nominal forward bias voltage of a silicon diode is 0.7V, depending on current and temperature. If the cathode is 4.5V, the anode should be around 5.2V.
Can a silicon diode be forward biased if the anode voltage is negative?
To be forward biased any diode (e.g. vacuum tube, crystal, junction, point contact) must have its relative anode voltage more positive than its cathode voltage. If the absolute anode voltage is negative but the cathode voltage is even more negative, then the diode will be forward biased. But as your question made no mention at all of the cathode, I cannot tell if this is the case or not.
