0
What else can I help you with?
How much work is needed to raise a 110kg load of bricks 12m above the ground to a building under construction?
mg= mass * gravity = 110 * 9.8 =1078 W=mg*height=1078*12m=12,963 J
Why is the standard door height six foot eight inches?
6'-8" is a module of 8". We use 8" because that is a standard module of brick and block construction, the oldest building technology. 6'-8" is generally required by building codes for egress purposes during emergency situations. Also for emergency personnel with helmets on.
How do you calculate energy input for lifting objects by weight and height lifted?
When an object is lifted to a certain height, the mechanical energy of the person or system lifting the object gets transferred into the potential energy of the object. Thus if an object of mass/weight 'm' is lifted to a height 'h', then the potential energy possed by the object at height 'h' is given as: Potential Energy (P.E)= m*g*h, where g is acceleration due to gravity and whose value is 9.8 m/s2.
What is the Advantage of a double dome in a building?
It helps to increase the height and diameter of the outer dome
What simple machine would you use to lift a piano to the top of a building?
To lift a piano to the top of a building, a pulley system would be the most effective simple machine. Pulleys can reduce the amount of force needed to lift heavy objects by distributing the weight and allowing for easier lifting with less effort. By using multiple pulleys in a block and tackle configuration, you can significantly decrease the force required to raise the piano safely to the desired height.
The work done in lifting 30 kg of bricks to a height of 20 m on a building under construction is?
The work done in lifting 30 kg of bricks to a height of 20 m would be ( W = mgh = 30 kg \times 9.8 m/s^2 \times 20 m = 5880 , \text{Joules} ). The work done is 5880 Joules.
How much work is done in lifting a 300-lb load of bricks to a height of 60 feet on a building under construction?
The work done in lifting the load of bricks can be calculated using the formula: work = force x distance. In this case, the force is the weight of the load (300 lbs) and the distance is the height it was lifted (60 feet). Therefore, the work done is 18,000 foot-pounds (300 lbs x 60 feet).
How many construction workers does it take to build a building?
depends on the area and height of the building
Is body building a height prevention?
it depends on what you are trying to do.. but heavy lifting can stunt your growth
How much work is needed to raise a 110kg load of bricks 12m above the ground to a building under construction?
mg= mass * gravity = 110 * 9.8 =1078 W=mg*height=1078*12m=12,963 J
Which is better cement hollow brick or red clay brick for construction of apartment?
The red clay brick is better than hollow brick for construction of apartments. Because bands should be constructed at every 5-10 feet height if we adopt hollow bricks. Moreover, red clay bricks have higher strength than hollow bricks.
Give TWO examples of where The Work at Height Regulations may apply to lifting operations?
Two examples of where the The Work at Height Regulations may apply to lifting operations including safety equipment and closely monitoring the lift. These simple steps can go a long way to prevent accidents or injuries.
How much does a multistory building weigh?
The weight of a multistory building is based upon factors such as height and its construction materials. The World Trade Center towers weighed some 1.5million tons total to give an idea of weight and height.
How high is one story?
Roughly 3-4 meters, or 10 feet. The exact height depends on the actual construction of the building.
Can weight lifting increase on apersons height?
No, it will not.
What is the tallest building ever now?
Burj Dubai, an under construction skyscraper in Dubai reached 2,684 ft in height in January 09
What is the scrap metal value of a building?
This depends on many factors including the size nd height of the building, type of construction, types of metals utilized (copper, steel, aluminum, stainless, etc.)
