0
What else can I help you with?
What does the size of a current depend upon?
One way to determine current is to measure it, with an ammeter. Another way is to calculate it using Ohm's law: current = voltage / resistance.
Why does current decrease when resistance increases?
Because that's the definition of Ohm's law. Current = voltage / resistance. Here's one way to think about it. Resistance is the degree of difficulty in moving charge from one place to another. If you increase that resistance, it is harder to move the charge. Current is rate of flow of that charge, hence current goes down.
What is the dimensional formula for current?
One way to calculate current is using ohms law; current equals voltage divided by resistance or: I=V/R Where I is current, V is voltage and R is resistance.
Why shunt resistance is connected in the parallel?
Shunt means parallel only..................
What was the resistance and what was its basic operations?
almost every country in Europe that was involved in ww2 had a resistance and it would secretly blow up building's spy's and would fight all Germans in some way or another. they usually held meetings about where they would attack next and etc. they were really good at blowing things up though so they did that ALOT.
What are some examples of Boolean connectors?
It like a vendiograme that you learn about in English, it is a easier way to searchthings on the computer. the words you use are AND, NOT, and OR.
What is the some examples of virtual reality?
Since VR technology is still developed, we have lots of examples of its use nowadays. For example, it is a possible way to improve the healthcare industry. I read some examples of it here.
How do you use overt in a positive way in sentence?
Overt resistance to a tyrant is usually considered more honorable than secret resistance.
What are some examples of sarcastic?
some examples are like " i really am tired." in a joking way but not all the time. hope i could help
Correct way to use the word on?
Turn the light on. Why is the fan on? Come on the train. These are all examples of how to use on... the correct way. hehe
How do you check if a diode is serviceable?
use a vomm set to infinite resistance if you have reistance one way and not the other way. diode is good (must be isolated from circuit) if no resistance both directions diode D.O.A.
How do you use onomatopoeia in a paragraph?
You use onomatopoeic words in the same way you use other words! This term is just a fancy way of saying that you write a word which sounds like a noise that you would make. Some examples include writing "ahem" or 'achoo." If you need to use a word like that in a sentence, then use it.
How do you use Pauline in a sentence?
Some examples are:Pauline was happy to learn that she got the job.Gemma was on her way to meet Pauline for lunch.Brian and Pauline have been married for fifteen years.
Does a car use wind resistance?
Wind resistance (actually, Air Resistance) works against a car- it has to push air out of the way. Cars that are "streamlined" are designed so they slip through the air more easily than those that are not.
What are some non examples of electric motor?
Non-examples of electric motors include mechanical devices that do not use electricity for power, such as a manual hand-cranked winch or a steam engine. Additionally, devices that use alternative sources of energy, like a windmill or a water wheel, are also not examples of electric motors. Finally, devices that convert energy in a different way, such as a pulley system or a hydraulic motor, are not considered electric motors.
What are some examples of right of way rules at intersections?
At intersections, right of way rules determine which vehicle has priority to proceed first. Some examples include yielding to vehicles already in the intersection, giving way to pedestrians in crosswalks, and obeying traffic signals and signs.
How can you find resistance of a component?
To measure the resistance of a component, you can use a multimeter set to the resistance (ohms) setting. Simply connect the two leads of the multimeter to the ends of the component, ensuring that there is no power running through the component. The multimeter will then display the resistance value of the component.
