0
What are the advantages and disadvantages of branch current method in circuit analysis?
Branch-current analysis isn't as foolproof or effective as mesh analysis, or node analysis. Although it is a very good method for one who is studying circuit analysis for the first time. Mainly because it allows you to get familiar with both of Kirchhoff's laws, and if understood, will broaden your understanding of the other methods. It will also make you appreciate them all that more... ;).
What else can I help you with?
What are the disadvantages of a double wound transformer?
There is no disadvantage with a current transformer -it does exactly what it's supposed to do, that is:reduce the current flowing in the primary circuit to a value that can be handled by its burden (ammeter or protective relay).electrically-isolate its secondary circuit from the primary circuit.
What are the advantages of series circuit?
The advantage of series is it uses less current than parallel
How short circuit current measure?
In shortg circuit current is infinitive.
What is the formula for total current in a series circuit?
Current = (Voltage across the circuit) divided by (Total resistance of the circuit). The current is the same at every point in the series circuit.
What is the advantages of using Thevenin Theorem?
Thevenin's Theorem is especially useful in analyzing power systems and other circuits where one particular resistor in the circuit (called the "load" resistor) is subject to change, and re-calculation of the circuit is necessary with each trial value of load resistance, to determine voltage across it and current through it.
Advantages and disadvantages of polyphase circuit?
fewer ripples in a direct current when alternating is converted to direct current
What is mesh analysis?
Mesh analysis is a method to solve a circuit. when a circuit is planer then mesh analysis can be applied in this circuit otherwise it can not be applied. For non planer circuit nodal analysis can help to determine current or voltage. Mesh analysis reduces the equations to get current.
What are the Advantages and disadvantages of current meter?
disadvantage of current meter
What are the advantages and disadvantages of current account deposits?
check
What is the Advantages disadvantages of current scenario in hospitality industry?
What_is_the_Advantages_disadvantages_of_current_scenario_in_hospitality_industry
What does a negative mesh current imply?
A negative mesh current simply indicates that the actual current direction is opposite to the assumed direction in the circuit analysis. This does not alter the magnitude of the current, only its direction. Negative mesh currents are common in network analysis and are used to correctly represent the current flow in a circuit.
What are the disadvantages of a double wound transformer?
There is no disadvantage with a current transformer -it does exactly what it's supposed to do, that is:reduce the current flowing in the primary circuit to a value that can be handled by its burden (ammeter or protective relay).electrically-isolate its secondary circuit from the primary circuit.
What are the advantages and disadvantages of current account?
That you might get hacked. So never tell anyone your password OKAY!
What are the advantages of push pull amplifier?
The advantage of this circuit is that there is very little current taken if there is no signal input
What are uses of conventional current?
Conventional current is used in electronics to represent the flow of positive charge from the positive terminal to the negative terminal of a battery. It is used to simplify circuit analysis and design. It helps in understanding the direction of current flow in a circuit.
When performing an AC analysis on a circuit which value of AC current should we use?
For calculations Peak or magnitude is used.
What is the parallell circuit?
There are three disadvantages of parallel circuits. These include the fact that they have complex resistance, voltage that is limited, and a current that varies.
