Current flowing through a device depends on resistance offered by that device.
"Rated current" is the current the device (motor or transformer?) is designed to handle at full load. "Tripping current" is the current where a protective device (fuse, breaker) will open to protect the device from overload/overheating. "Tripped current", may be the current the tripping device measured prior to making the decision to trip, if you are reading this from a digital protective device like a relay or OCR.
A Rectifier converts Alternating current into Direct current
Answeractive device : they are the devices in which the electron flow( current) can be controlled electrically else a device with controlling of current flowPassive device : they are the device where electron flow ( current ) cannot be controlled electricallyelse a device with out controlling otion of current flowI studied the above from net and i felt it is correctany new definition (more appropriate) are welcome
Commutation in a rectifier: Refers to the process of transfer of current from one device (diode or thyristor) to the other in a rectifier. The device from which the current is transferred is called the "out going device" and the device to which the current is transferred is called the "incoming device". The incoming device turns on at the beginning of commutation while the out going device turns off at the end of commutation.Commutation failure: Refers to the situation where the out going device fails to turn off at the end of commutation and continues to conduct current.
It is a device inserted to a convinience outlet to conduct electric current. A flat cord is attached to it on one end and the other end is to a current consuming instrument or appliance... :)
It refers to a device any device whereby the device has limit to carry current. Therefore the term current capacity
transistor is a current controlled device. as the current flows through the base of the transistor , it works like a close switch.
Triac is the current control device.
Current flowing through a device depends on resistance offered by that device.
"Rated current" is the current the device (motor or transformer?) is designed to handle at full load. "Tripping current" is the current where a protective device (fuse, breaker) will open to protect the device from overload/overheating. "Tripped current", may be the current the tripping device measured prior to making the decision to trip, if you are reading this from a digital protective device like a relay or OCR.
a typical example of a d.c current device is a generator it supplies current directly to houses
A device that changes the direction of the current is called a "switch" or a "reversing switch." This device allows for the current to flow in different directions as needed.
no it does not make stronger.... if the device does not have that capability to with stand tat current...... the device will be destroyed........
The current status of the device is "PRL" (Preferred Roaming List) which determines the preferred networks for the device to connect to.
BJT is a example for current controll device. And JFET is a voltage controlled device.
A Rectifier converts Alternating current into Direct current