0
What else can I help you with?
What is the Purpose of foundation in building construction?
The purpose of a foundation is to distribute the load from the superstructure to the soil below so that the structure is safe and can with stand the loads - dead load,wind load, live load and seismic loads. The settlements should also be with in accepted limits.
What is breaking load in traction?
Breaking load in traction refers to the maximum load or force that a material, structure, or component can withstand before failing or breaking under tension. It is a critical parameter in engineering and materials science, as it helps determine the safety and performance limits of various applications, such as cables, ropes, and structural elements. Understanding the breaking load is essential for ensuring that systems can safely support operational loads without risking failure.
How does a 1 in 100 gradient limit a locomotives load?
1 in 100 gradient = 1% incline or a rise of 1ft per 100 ft of travel. To understand how this limits a locomotive load try carrying a bundle of roof shingles 100 ft on level ground, then climb a 100 ft ladder with them.
What is the effect of no emitter resistance on common emitter amplifier?
Limit current through emitter, Often the resistance is the load itself. So the restatnce limits current on what otherwise would act as a voltage follower.
Why electric generator drop the load?
Too much load for the generator, the generator began to under speed / overspeed, the governor / part of the generator went into failure, the generator capability was not up to the requirements placed by the system (needing to push out/pull in too many VARs), etc. there are many reasons for a generator to drop a load. Because a load dropped, this does not infer that the generator was the cause either (fault on the system, system instability limits reached, system protection tripped - non-generator related protection).
What is the law regarding stick out distance of load?
passed the limits of ur vehicle and u must have a wide load flag. (arizona)
Maximum safe load limits of what must be posted within buildings and structurs?
floors
What is the Purpose of foundation in building construction?
The purpose of a foundation is to distribute the load from the superstructure to the soil below so that the structure is safe and can with stand the loads - dead load,wind load, live load and seismic loads. The settlements should also be with in accepted limits.
What two things does the location of the fulcrum and load affect?
The location of the fulcrum and load affects the amount of effort needed to lift the load and the distance the load can be moved. Placing the fulcrum closer to the load reduces the effort needed but limits how far the load can be moved, while placing the fulcrum closer to the effort increases the distance the load can be moved but requires more effort.
What three things determine how much liquid you can load?
The amount the liquid will expand in transit. The weight of the liquid. Legal weight limits.
Where can you find information on recommended safe limits for a boat's maximum total load?
You can find information on recommended safe limits for a boat's maximum total load in the boat's owner’s manual or manufacturer's specifications, which typically include weight limits for passengers and cargo. Additionally, the capacity plate, often located near the operator's position, provides essential information about maximum weight and passenger limits. For further guidance, consult resources from local boating authorities or safety organizations like the U.S. Coast Guard.
What is the exciter voltage needs to test the generator?
Because the voltage is fixed (within allowable limits) whereas the current varies according to load.
Can you legally load a semi trailer from the floor to the ceiling?
If the axles on that vehicle are all within legal weight limits and the gross weight is legal, yes.
What is permissible Load density and load density?
Permissible load density refers to the maximum allowable weight that can be placed within a specific area or volume without causing structural damage. Load density, on the other hand, is the actual weight per unit area or volume of a material or object being placed on a surface or structure. It is important to adhere to permissible load density limits to prevent overloading and potential collapse.
What is yield load?
Yield load refers to the maximum load that a material or structure can withstand before it begins to deform plastically, meaning it will not return to its original shape once the load is removed. It is a critical factor in engineering and materials science, as it helps determine the safety and performance limits of structures and components. Beyond the yield load, materials may experience permanent deformation or failure. Yield load is typically assessed through standardized testing methods, such as tensile tests.
What are three elements that can cause over load on the muscles or muscle groups?
1. overworked to an extent 2. run out of carbs 3. not knowing your body's limits
When is a forklift most stable?
A forklift is most stable when it is properly loaded with its load within its capacity limits, the load is secure and evenly distributed, and the forklift is operated on a level surface. Additionally, the mast should be tilted slightly back to ensure stability.
