0
What else can I help you with?
Can you use a 6 volt relay to 230 volt circuit?
If you are talking about a 6 volt coil, yes, so long as the contacts are rated for the 230 volt circuit. If you are talking about 6 volt contacts, no, absolutely not.
A digital circuit can be corrupted by electrical noise having a value of?
1 volt
How do you test the power in a circuit?
A volt meter will do the job.
In a 240 volt single phase circuit A phase is 4000 watts B phase is 7000 watts what is the neutral load?
Question is incorrect. in a 240 Volt single phase circuit, how can you have A phase and B phase?
What is the measurement on a 460 volt 3 phase circuit from 1 leg to ground?
The formula you are looking for is 460 divided by the square root of 3 (1.73).
What color is the hot wire in a 120 volt circuit?
In the US of A, it's supposed to be black.
How do you connect a volt to a circuit?
A volt can not be connected to a circuit.
Can you connect 110 volt circuit breaker to 220 volt circuit?
No, you cannot directly connect a 110-volt circuit breaker to a 220-volt circuit. Circuit breakers are designed for specific voltage ratings, and using a 110-volt breaker on a 220-volt circuit can lead to improper operation, potential equipment damage, or safety hazards. If you need to work with a 220-volt circuit, you should use a breaker rated for that voltage. Always follow electrical codes and consult a qualified electrician for such modifications.
Can you plug 120 volts into an 85 watt cigarette lighter in a car?
An automobile cigarette lighter uses 12 Volts DC. A typical 120 Volt circuit would destroy the 12 volt lighter.
Is 24 voltage a lot?
It depends on the use it is being put to. It is sufficient for a 24 volt circuit. Too much for a 12 volt circuit and too little for a 240 volt circuit.
Is a map of a circuit a volt?
A map of a circuit is not a volt. A map of a circuit is referred to as a schematics chart. The schematics chart details the path of the circuit, from beginning to end.
Can you use a 6 volt relay to 230 volt circuit?
If you are talking about a 6 volt coil, yes, so long as the contacts are rated for the 230 volt circuit. If you are talking about 6 volt contacts, no, absolutely not.
What is the Color of neutral wire in 120 volt circuit?
For wiring in the USA the Neutral conductor is required to be white or gray by the National Electrical Code.
What is the recommended wire size for a 220 volt circuit according to the 220 volt wire size chart?
The recommended wire size for a 220 volt circuit according to the 220 volt wire size chart is typically 10 gauge wire for a circuit with a maximum of 30 amps.
How long does current remain in a 220 volt circuit?
The current in a 220 volt circuit depends on the resistance of the load connected to it. Ohm's Law (I = V/R) states that current (I) is equal to voltage (V) divided by resistance (R). So, the current will vary based on the resistance of the circuit.
Can you wire a 120 volt ballast to a 347 volt circuit?
No, you cannot wire a 120 volt ballast to a 347 volt circuit. The ballast is designed to operate at a specific voltage, in this case 120 volts, and connecting it to a higher voltage circuit like 347 volts can damage the ballast and pose a safety hazard. It is important to match the voltage rating of the ballast to the circuit it will be connected to.
What is the recommended wire size for a 220-volt electrical circuit?
The recommended wire size for a 220-volt electrical circuit is typically 10-gauge wire.
