0
What else can I help you with?
If you charge four 50v capacitors in parallel then remove the 50v battery and hook it up to a volt meter will the meter say 50v or 200v?
If you charge four 50v capacitors in parallel then remove the 50v battery and hook them up to a volt meter the meter will indicate 50v.
What size capacitor can i replace a 1000uf 50v with if i don't have the exact one i am working on a project and it calls for 1000uf 50v cap I know i need 50v plus but can i use 1200uf 50v or 2000uf?
When replacing a capacitor in a circuit, it is generally safe to increase the capacitance value while keeping the voltage rating the same or higher. In this case, you can replace a 1000uF 50V capacitor with a 1200uF 50V capacitor without any issues. However, using a 2000uF capacitor may not be ideal as it significantly deviates from the original capacitance value, potentially affecting the circuit's performance. It is recommended to stick as close as possible to the original specifications for optimal results.
How much charge is in a 6800-μF capacitor with 50 V across it?
50V
What is the piv for diode if input is 50v?
The PIV (Peak Inverse Voltage) for a diode is the maximum reverse voltage that the diode can withstand without breaking down. If the input voltage is 50V, the PIV should typically be greater than 50V to ensure safe operation under reverse conditions. It's common practice to choose a diode with a PIV rating at least 20-30% higher than the input voltage, so a diode rated for at least 65-70V would be advisable.
What is the lowest value of current that may cause death?
It is difficult to define the value which may cause death. I think it the voltage which is dangerous. Approximately a voltage of 50V is dangerous for heart.
If you charge four 50v capacitors in parallel then remove the 50v battery and hook it up to a volt meter will the meter say 50v or 200v?
If you charge four 50v capacitors in parallel then remove the 50v battery and hook them up to a volt meter the meter will indicate 50v.
What size capacitor can i replace a 1000uf 50v with if i don't have the exact one. i am working on a project and it calls for 1000uf 50v cap. I know i need 50v plus but can i use 1200uf 50v or 2000uf?
You can use a larger capacitor (more uF) in the decoupling or smoothing parts of the circuit, but not in anything that is used to control the frequency response, but that is unlikely.
How much voltage does a cfl use in a day?
it uses about 50v
How can you make a 15v ac generator to produce 50v ac?
somehow
A typical value of reverse breakdown voltage in a diode is?
50V or larger
Could you use a 50v peroxide develper to lighten your hair?
Yes, a 50V developer can be used to lighten hair but more than likely it will break the hair and cause irreversible damage. A 30V is recommended instead.
What size capacitor can i replace a 1000uf 50v with if i don't have the exact one i am working on a project and it calls for 1000uf 50v cap I know i need 50v plus but can i use 1200uf 50v or 2000uf?
When replacing a capacitor in a circuit, it is generally safe to increase the capacitance value while keeping the voltage rating the same or higher. In this case, you can replace a 1000uF 50V capacitor with a 1200uF 50V capacitor without any issues. However, using a 2000uF capacitor may not be ideal as it significantly deviates from the original capacitance value, potentially affecting the circuit's performance. It is recommended to stick as close as possible to the original specifications for optimal results.
How much charge is in a 6800-μF capacitor with 50 V across it?
50V
How are you losing volts by slicing a wire with 120v the going to 50v?
The voltage is lost at the slice.
When capacitors ate connected in series the capacitance increase or decrease?
Capacitors in connected in series result in a higher voltage rating, but lower capacitance. Two 470uF 50V capacitors connected in series will give you a total of 235uF, but you can put up to 100V across the series combination. Two 470uF 50V capacitors connected in parallel will give you a total of 940uF, across which you can put 50V (the voltage rating does not change for capacitors in parallel).
What is the reliable smoothing capacitor for rectified 24VDC?
FOR A 24VDC it is best to install a 50v breakdown capacitor to ensure reliability
What is the chain size on a 1984 suzuki gsx750ef?
the manual says: daido: 50v or takasago: rk50go. 114 links
