Depends on the encoding. It is probably 0xF (15), but it could be -1 (if 4 bits in 2's complement), or any other value if a non-standard encoding. the coding can be octal or hexadecimal the value in decimal does not change in octal it is 17 in hexadecimal it is F in decimal is 15. ALL of these numbers are right it depends of what code the reference is to
digital converter extracts samples of analog signal from input siganl digital converter quantizes analog sample and assignes a binary numbervalue to it digital coanverter encodes a quantized analog signal to transmit it across a digital network
Digital transformation of the sampling rate of signals, or signal processing with different sampling rates in the system.
The digital signals is not converted BACK to analog! it is transmitted in digital form and the receiver is converting it back to analog to drive the speakers. The signal from the microphone is converted from analog to digital with an A/D converter chip, digital signals consist of pulses of different lengths that is switching the transmitter on and off in about the same way as the old Morse code transmissions but at a much higher rate (millions of times higher)
Regenerative Repeater is used for the PCM (Pulse code modulation ) it amplifies the signal because the effect of the channel over the signal .
Multiply by 16. ANSWER: The answer is bcd 11 = 3 111 = 7 1111 i= F 01111 =E and so foirth
Morse code is a digital signal.
1111 in binary is 15 in decimal.
Rainer Leupers has written: 'Retargetable code generation for digital signal processors' -- subject(s): Code generators, Signal processing, Digital techniques 'Code Optimization Techniques for Embedded Processors - Methods, Algorithms, and Tools'
well yes and no yes it Will represents letter but as a function of an ASCII code like digital 41 Will represents the letter A
523643
1111
1111
A digital signal is a physical signal that is a representation of a sequence of discrete values (a quantified discrete-time signal), for example of an arbitrary bit stream, or of a digitized (sampled and analog-to-digital converted) analog signal. The term digital signal can refer to either of the following:any continuous-time waveform signal used in digital communication, representing a bit stream or other sequence of discrete valuesa pulse train signal that switches between a discrete number of voltage levels or levels of light intensity, also known as a line coded signal or baseband transmission, for example a signal found in digital electronics or in serial communications, or a pulse code modulation (PCM) representation of a digitized analog signal.A signal that is generated by means of a digital modulation method (digital passband transmission), to be transferred between modems, is in the first case considered as a digital signal, and in the second case as converted to an analog signal.
1111
1111
1111 for frenzoo
1111