Morse Code is a digital signal.
modem Measuring usually the voltage of the analog signal many times a second in binary number code generates a digital signal, and using a binary number code to control the voltage of an output results in a reproduced analog signal. That is what is done for stuff like digital television. A Modem (prior answer) is for when the analog signals are used to connect digital computers (like yours) together, usually over a long distance.
No, Pulse Code Modulation is a communication method used to carry digital data but is not part of any analog to digital conversion. PCM is often used to carry audio data as a digital stream and therefore is the encoding used as the signal is first converted to a digital format.
The digital signals is not converted BACK to analog! it is transmitted in digital form and the receiver is converting it back to analog to drive the speakers. The signal from the microphone is converted from analog to digital with an A/D converter chip, digital signals consist of pulses of different lengths that is switching the transmitter on and off in about the same way as the old Morse code transmissions but at a much higher rate (millions of times higher)
The process of converting analog sound into digital code is called analog-to-digital conversion (ADC). During this process, the continuous analog signal is sampled at specific intervals and quantized into discrete values, which can then be represented in binary code for computer processing. This allows the analog sound to be stored, manipulated, and played back by digital devices.
A digital signal is a physical signal that is a representation of a sequence of discrete values (a quantified discrete-time signal), for example of an arbitrary bit stream, or of a digitized (sampled and analog-to-digital converted) analog signal. The term digital signal can refer to either of the following:any continuous-time waveform signal used in digital communication, representing a bit stream or other sequence of discrete valuesa pulse train signal that switches between a discrete number of voltage levels or levels of light intensity, also known as a line coded signal or baseband transmission, for example a signal found in digital electronics or in serial communications, or a pulse code modulation (PCM) representation of a digitized analog signal.A signal that is generated by means of a digital modulation method (digital passband transmission), to be transferred between modems, is in the first case considered as a digital signal, and in the second case as converted to an analog signal.
the digital code is binar. so if you get a signal it is absolut. analogue signals can be interfered or altered through interferation.
Analog digital code refers to a system that represents analog signals in a digital format. This process involves sampling the continuous analog signal at specific intervals and quantizing the sampled values into discrete levels, allowing for digital representation and processing. The conversion enables more efficient storage, transmission, and manipulation of audio, video, and other types of data in digital systems. Common examples include Pulse Code Modulation (PCM) used in audio recordings and digital communication.
digital converter extracts samples of analog signal from input siganl digital converter quantizes analog sample and assignes a binary numbervalue to it digital coanverter encodes a quantized analog signal to transmit it across a digital network
The advantage of analog over digital or vice versa , is dependent on the input information type and / or signal amplitude where applicable , also on what the application is and other considerations like information / signal processing , storage , etc. The choice is decided by the advantages as per the requirements. As a rule the information carried by an analog signal is dependent on its instantaneous magnitude or position.Thus it is highly susecptible to corruption by extraneous noise sources which can affect the magnitude arbitrarily. On the other hand a digital signal typically carries information as changes in amplitude level between two ( or more ) arbitrarily predefined levels, arranged in a predetermined format and grouping ( more familiar as a code ). As long as the digital signal can be retrived without major loss in blocks of code , the original information can be mathematically retrived. Whenever the information and / or signal level is very small and / or in analog form , invariably some form of analog processing is required before any meaningful conversion to digital format or processing can be done. Now due to vast processing powers of digital circuits & computers , the advantage of analog is limited to very specialised requirements where the disadvantages of digital format would outweigh any other considertions. So for all purposes it would be invariably advantageous to use digital format and convert to analog whenever required. The only notable analog format which will always be required is for human sound & visual interface ( or for that matter other senses ) which the body perceives and processes only as analog signals , even the pseudo analog modes of Class D Audio Amplifiers , LCD Displays , Projection , Digital Printing etc. which operate in the Digital mode to simulate analog signal output. It may be noted that the Morse Code was essentially a digital format, while Semaphore ( uses Flag & Hand positions to convey information ) was an analog signal by virtue of hand position.
Yes
morse code braille semaphore
All digital devices that produce audio out put IE CD player / dab radio have a digital to analog converter chip, all sounds you hear are analogue if it were in digital all you would hear is just high pitch screeching no matter what sound you are listening to, it would be like hearing Morse code speeded up thousand fold constantly, phones transmit a digitally signal, there for when you speak into it it has to convert your analogue voice into digital to transmit then convert it back to analogue so you can under stand.