answersLogoWhite

0

What else can I help you with?

Continue Learning about Engineering

How do you calculate a lever's mechanical advantage?

From the design of the lever (on paper), the mechanical advantage is effort arm/load arm which means Distance from pivot to the applied force/distance from pivot to the load The result of that is that the forces will have the reciprocal ratio, and the input force to the lever will be the output force/the Mechanical Advantage .


How do you calculate the mechanical advantage of any machine?

distance over which the force is applied ________________________________ Distance over which the load was moved or MA= Effort Force _________ Load force OR MA= Length of Load arm ____________________X Weight/mass Length of Effort arm


Why does a fixed pulley have a mechanical advantage of one and a movable pulley has a mechanical advantage of two?

we find mechanical advantage of pulley by using principle of lever. according to this moment of effort is equal to moment of moment of load. As in this case effort arm is equal to load arm. so mechanical advantage is equal to one. but we know we can never finish friction between rope used and pulley so mechanical advantage is less than one


What is the mechanical advantage of a machine without friction?

Machinal advantage, also known as mechanical advantage, refers to the ratio of the force produced by a machine to the force applied to it. A machine can be useful even its machinal advantage is less than 1.


Mechanical advantage is defined as the number of times that a machine increases an applied force for a given machine which would always decrease the mechanical advantage of that particular machine?

To find the mechanical advantage of a simple machine divide output force by input force. (input force is the force that we exert on a machine, and output force is the force that is exerted by a machine).

Related Questions

What equation would use to calculate the ideal mechanical advantage of a wheel and axel if the imput force is applied to the axel?

The equation for calculating the ideal mechanical advantage of a wheel and axle when the input force is applied to the axle is: Ideal Mechanical Advantage (IMA) = Radius of Wheel / Radius of Axle where the radius of the wheel and axle are the distances from the center of rotation to where the force is applied.


What is the pulley equation used for in mechanical systems?

The pulley equation is used in mechanical systems to calculate the relationship between the forces applied to a pulley system and the resulting motion or load. It helps determine the mechanical advantage and efficiency of the system.


What two things you you need to know to calculate mechanical advantage?

To calculate mechanical advantage, you need to know the effort force applied to the machine and the resistance force it is able to overcome. By dividing the resistance force by the effort force, you can determine the mechanical advantage of the machine.


What equation would you to calculate the ideal mechanical advantage of a wheel and axle if the input force is on the axle?

The formula to calculate the ideal mechanical advantage (IMA) of a wheel and axle when the input force is applied to the axle is: IMA = Radius of wheel (Rw) / Radius of axle (Ra) Where Rw is the radius of the wheel and Ra is the radius of the axle.


What is the formula of calculating effort distance in mechanical advantage?

The formula to calculate effort distance in mechanical advantage is Effort Distance = Load Distance / Mechanical Advantage. This means that effort distance is the distance over which the effort force is applied to move the load in a machine.


How can we analyaze the mechanical advantage of a pulley system?

To analyze the mechanical advantage of a pulley system, you calculate it by dividing the output force (load) by the input force (applied force). The mechanical advantage of a pulley system is equal to the number of rope sections supporting the load. More rope sections mean a greater mechanical advantage.


How do you calculate a lever's mechanical advantage?

From the design of the lever (on paper), the mechanical advantage is effort arm/load arm which means Distance from pivot to the applied force/distance from pivot to the load The result of that is that the forces will have the reciprocal ratio, and the input force to the lever will be the output force/the Mechanical Advantage .


How do you calculate input and output force?

To calculate input force, divide the output force by the mechanical advantage of the machine or system. Input force = Output force / Mechanical advantage. The output force is the force exerted by the machine, while the input force is the force applied to the machine.


How can one determine the mechanical advantage in a given system?

To determine the mechanical advantage in a given system, you can calculate it by dividing the output force by the input force. This ratio helps you understand how much the system amplifies or reduces the force applied.


What do you need to know to calculate the machinical advantage of a compond machine?

To calculate the mechanical advantage of a compound machine, you need to know the input force applied to the machine, the output force produced by the machine, and the distance over which the input and output forces are exerted. By comparing the input force to the output force, you can determine the mechanical advantage of the compound machine.


What do you need to know to calculate the mechanical advantage of a compound machine?

To calculate the mechanical advantage of a compound machine, you need to know the input force applied to the machine and the output force obtained from the machine. Additionally, you will need to understand how the individual simple machines within the compound machine are connected or arranged to determine the total mechanical advantage.


How do you get the mechanical advantage of a screw?

The mechanical advantage of a screw can be found by dividing the circumference of the screw by the pitch of the screw. In this case, the total mechanical advantage is equal to the circumference of the simple machine to which the effort force is applied divided by the pitch of the screw.