0
What else can I help you with?
How is a water wheel similar to a turbine in a hydroelectric power plant?
Both have blades or buckets.
How does a turbo blower work?
turbo blower is an equipment where a turbine is attached with the blower part. steam enters through the turbine inlet and expands through the blades and goes to the outlet which helps the turbine shafts to rotate. this turbine shaft is attached with the shaft of blower that makes the blower rotating.
What relationship exsists between turbine and generator?
A turbine is powered by such things as steam, burning gas or oil, water, or wind. The turbine is a type of engine, which might be thought of as a more efficient choice than a gas engine or reciprocating steam engine for doing the same job. The turbine could do many things ranging from powering a vehicle such as a helicopter, a ship, a locomotive, or a piece of equipment such as a centrifuge, a pump, or a generator. When a turbine powers a generator, the generator makes electricity.
What is difference between radial flow turbine and axial flow turbine?
in a radial flow turbine the steam enters the turbine in the direction of its radius and leaves it in the direction of the axis of the shaft. in a axial flow turbine the steam enters the turbine in the direction of the axis of the shaft and leaves the turbine in the same direction.
How do you spell turbine?
Turbine is the correct spelling.
Why pelton turbine is called as impulse turbine?
Water is blasted at the buckets one by one or more jets mounted in the surroundings casing. Momentum is transferred from water to buckets and a torque is created, causing the wheel to rotate. That's why it is an impulse turbine.
How is a water wheel similar to a turbine in a hydroelectric power plant?
Both have blades or buckets.
What is governing of impulse turbine?
Basically governing of a turbine is controlling the speed of the turbine as the load keeps varying. The turbine needs to rotate at a constant speed. The governing of an impulse turbine is done by varying the jet of water that hits the buckets of the runner. This is done by using a spear arrangement in the pen stock. A pen stock is a type of pipe that provides the jet of water.
What is governing of turbines?
Basically governing of a turbine is controlling the speed of the turbine as the load keeps varying. The turbine needs to rotate at a constant speed. The governing of an impulse turbine is done by varying the jet of water that hits the buckets of the runner. This is done by using a spear arrangement in the pen stock. A pen stock is a type of pipe that provides the jet of water.
How does a turbo blower work?
turbo blower is an equipment where a turbine is attached with the blower part. steam enters through the turbine inlet and expands through the blades and goes to the outlet which helps the turbine shafts to rotate. this turbine shaft is attached with the shaft of blower that makes the blower rotating.
Where can one find turbine parts?
There are several websites that supply turbine parts. One of these websites is utpparts.com. You can get used turbine parts here http://lcec.info/equipment/Used_Surplus_Turbine_Parts. You can also get turbine parts here http://www.etspower.com/. You may have to search other sites if there is a specific part that you need.
How much does it cost to maintain a wind turbine?
The cost to maintain a wind turbine can vary depending on factors such as its size, location, and age. On average, annual maintenance costs can range from $3,000 to $10,000 per megawatt of capacity. Regular maintenance helps ensure optimal efficiency and longevity of the turbine.
What is turbine overspeed trip?
Typically two balls with springs holding them down, When the turbine spins too fast, the centrifugal force pushes the balls past the resistance of the springs at which point they hit a lever that stops steam/compressed gas flow to the turbine and the turbine shuts down. They are designed to keep the turbine from going so fast that it damages itself or the piece of equipment it is driving.
Why the gas turbine needs 3 bucket stages only in 110MW TURBINE?
The 3 bucket stages in a 110MW gas turbine are designed to efficiently extract energy from the high-pressure hot gas produced by combustion. By using 3 stages, the turbine can effectively expand the gas across multiple stages, thereby maximizing energy extraction and overall efficiency within the power plant. Additionally, the design may also optimize the velocity and pressure of the gas flow to ensure proper turbine performance at the specified power output level.
What will the electricity of a wind turbine cost?
This is a question of how much electrical energy you want to produce, against the cost of the equipment to produce it.
Will a turbine run out?
i will never run out my name is summer im............................................................................................................................................................................................................................................................................................
What is HP and LP turbine expansion?
HP Turbine is High Performance Turbine LP Turbine is Low Performance Turbine
