1),water content
2),mix praportions
3),size of aggregates
4),shape of aggregate
5),surface texture
6),grading of aggregates
7),use of admixture
Aggregates with angular particles are more difficulties to compact than one with rounded particles and therefor,requires more water in the mix to act as alubricant.this additional water, on evaporation ,tends to leave void spaces in the hardened concrete made with rounded aggregates particles which requires less water for compaction.the nature of the particles of an aggregates will also affect workability.(
The main difference between concrete grade C35 and C35A lies in their composition. C35 concrete is a standard concrete mix with a minimum strength of 35 megapascals (MPa), while C35A concrete is a special mix that includes air-entraining agents to improve workability and durability. The inclusion of air-entraining agents in C35A helps to increase the concrete's resistance to freeze-thaw cycles and reduce the risk of cracking. Overall, C35A is more suitable for applications where improved durability and workability are required.
Compressive Strength Workability Durability Maximum Size of Aggregate Water/Cement Ratio Quality Control
In Quebec, a cubic meter of concrete typically requires about 300 to 350 kilograms of cement, depending on the specific mix design and intended application. This is generally around 10-12% of the total volume of the concrete mix. The exact amount can vary based on factors like desired strength, workability, and the inclusion of additives or supplementary cementitious materials. Always consult local standards and guidelines for precise calculations.
simply workabilty is the w/c ratio in concrete. more the w/c ratio higher the workability and vice versa. and it is true that excess amount of w/c ratio doesnt give proper strength. so workable concrete i.e, concrete with proper w/c is must for good strength. *note: not considering the mix of concrete.
Silpozz improves workability by reducing segregation and bleeding, resulting in a more cohesive and easy-to-handle mix.
Its the process of selecting suitable ingredients of concrete and determining their relative amounts with the objective of producing a concrete of the required, strength, durability, and workability as economically as possible, is termed the concrete mix design.
The property of concrete which determines the amount of useful work (like- water content, mix proportion, size of aggregate used and use of admixtures) necessary to produce full compaction is called workability.
To make moldable concrete, mix concrete with a polymer additive that increases its flexibility and workability. This allows the concrete to be shaped and molded into various forms before it hardens.
The best concrete for crafts is typically a fine-grained, high-strength concrete mix that is easy to work with and provides a smooth finish. Look for a mix specifically designed for crafting projects, as it will have the right balance of strength and workability for your needs.
Aggregates with angular particles are more difficulties to compact than one with rounded particles and therefor,requires more water in the mix to act as alubricant.this additional water, on evaporation ,tends to leave void spaces in the hardened concrete made with rounded aggregates particles which requires less water for compaction.the nature of the particles of an aggregates will also affect workability.(
The main difference between concrete grade C35 and C35A lies in their composition. C35 concrete is a standard concrete mix with a minimum strength of 35 megapascals (MPa), while C35A concrete is a special mix that includes air-entraining agents to improve workability and durability. The inclusion of air-entraining agents in C35A helps to increase the concrete's resistance to freeze-thaw cycles and reduce the risk of cracking. Overall, C35A is more suitable for applications where improved durability and workability are required.
Yes, lime is one of the ingredients in concrete mixes. It is used to improve workability and reduce the amount of water needed in the mix, which ultimately helps increase the strength and durability of the concrete.
A slump test is a method to measure the workability or consistency of concrete when it is fresh. It involves filling a cone-shaped mold with concrete, then removing the mold and measuring how much the concrete slumps or subsides. This test helps ensure that the concrete mix has the desired flowability for proper placement.
Compressive Strength Workability Durability Maximum Size of Aggregate Water/Cement Ratio Quality Control
In Quebec, a cubic meter of concrete typically requires about 300 to 350 kilograms of cement, depending on the specific mix design and intended application. This is generally around 10-12% of the total volume of the concrete mix. The exact amount can vary based on factors like desired strength, workability, and the inclusion of additives or supplementary cementitious materials. Always consult local standards and guidelines for precise calculations.
It is not recommended to mix chalk with concrete as chalk is not a suitable additive for concrete. Chalk is primarily composed of calcium carbonate, which can affect the overall strength and durability of concrete when mixed in. It is best to use materials that are specifically designed for concrete mixes.