answersLogoWhite

0

there is a chance of reverse flow of currents in fases so distribution transformer neutral earthing is compulsory

and wr in the case of transmission there is no chance of reverse current flowing because reverse currents flow only from load side

hope ui get me by sandeepraj patnala

Answer

The potential of the line and neutral conductors, with respect to earth, can shift. No reason why the currents should reverse! And removing the earth connection puts the secondary side at risk, in the event of an interwinding fault -i.e. a fault between the h.v. and l.v. side of the transformer.

User Avatar

Wiki User

13y ago

What else can I help you with?

Continue Learning about Engineering

How many earthing are required to install transformer?

Four number earthing are essential for installation of transformer as under : 1) Two earthing for transformer body. 2) Two earthing for Neutral Point. Note : Numbers of earthing may be increase as per the client requirement.


How many types of earthing methods are there?

There are at least six types of earthing system, identified as follows:TNTN-CTN-STN-C-STTITThe first letter indicates the type of earthing at the distribution transformer, with T (= 'terre') indicating that one or more points of the supply are directly or 'solidly' earthed (e.g. an earthed neutral), and I indicating that either there is no earth at all, or earthing is achieved via an impedance.The second letter indicates the earthing arrangement at the electrical installation, with N indicating that all conductive parts are connected to an earth terminal provided by the utility company, and T indicating that the conductive parts are connected directly to a buried earth electrode.The third letter indicates the arrangement for the earthed supply conductor, with C indicating that the supply's neutral and earthing conductors are combined, and Sindicating that the supply's neutral and earthing conductors are separate all the way from the transformer.The fourth letter, S, indicates that within the installation, the neutral and earth conductors are separate.(The TN-C-S system is also commonly known as 'protective multiple earthing'.)


What is maximum distance of Earth pit for transformer neutral earthing?

100meter


What is earthing of electric motor?

This is avoided by grounding the motor frame. Both methods effectively produce a solid electrical connection straight to the stator laminations, allowing any insulation failure to be grounded via the end-ground user's conductor. Earthing is a technique in preventing electric shocks. To start, virtually all electric motors require grounding. The neutral earthing is given in the generator, transformer, motor, and other electrical devices by connecting the non-current carrying section to the neutral earthing.


How do you test neutral earthing compensator and resistor?

Testing a neutral earthing compensator and resistor typically involves measuring the resistance of the earthing system using a megohmmeter, ensuring it falls within specified limits. Additionally, the functionality of the compensator can be verified by simulating fault conditions to observe its response and effectiveness in limiting fault currents. Regular inspections for physical damage or corrosion, as well as testing for continuity and insulation resistance, are also essential to ensure reliability and safety.

Related Questions

What is rod earthing?

It is the installation of ground rods at a service entrance distribution to bring the relative resistance to ground to be within 5 ohms of the utility's distribution network. This grounding system is then connected to the service distribution with a calculated size wire and connected to the distribution at a point within the distribution panel, where the service neutral wire joins the neutral bus bar.


What is the earthing system used in qatar?

In Qatar, the earthing system primarily used is the TN-S (Terra Neutral-Separate) system. This system ensures that the neutral and earth conductors are separated throughout the electrical distribution network, enhancing safety and reliability. Additionally, the use of earthing electrodes, such as ground rods and plates, is common to provide effective grounding for electrical installations. Compliance with local electrical codes and standards is crucial for ensuring proper earthing practices.


What is neutral earthing?

Neutral earthing are grounding options available for both low and medium voltage power systems. It provides point of zero volts.


How many earthing are required to install transformer?

Four number earthing are essential for installation of transformer as under : 1) Two earthing for transformer body. 2) Two earthing for Neutral Point. Note : Numbers of earthing may be increase as per the client requirement.


What are the types of electrical earthing with respect to Electrodes?

Electrical earthing is classified into many types as Neutral earthing Body earthing Pipe earthing Plate earthing Chemical earthing Ground Compound Earthing


How many types of earthing methods are there?

There are at least six types of earthing system, identified as follows:TNTN-CTN-STN-C-STTITThe first letter indicates the type of earthing at the distribution transformer, with T (= 'terre') indicating that one or more points of the supply are directly or 'solidly' earthed (e.g. an earthed neutral), and I indicating that either there is no earth at all, or earthing is achieved via an impedance.The second letter indicates the earthing arrangement at the electrical installation, with N indicating that all conductive parts are connected to an earth terminal provided by the utility company, and T indicating that the conductive parts are connected directly to a buried earth electrode.The third letter indicates the arrangement for the earthed supply conductor, with C indicating that the supply's neutral and earthing conductors are combined, and Sindicating that the supply's neutral and earthing conductors are separate all the way from the transformer.The fourth letter, S, indicates that within the installation, the neutral and earth conductors are separate.(The TN-C-S system is also commonly known as 'protective multiple earthing'.)


What is maximum distance of Earth pit for transformer neutral earthing?

100meter


What is meant by PEN conductor when referring to earthing of supply system?

Conductor combining the functions of both a protective earthing conductor and a neutral conductor


How do you install earthing neutral for transformer in transformer room?

you shouldn't do it yourself, get an electrician.


What is the power line voltage between phase and earthing?

It is the same as phase to neutral. As the neutral is earthed at the electricity suppliers transformer.


what is neutral earthing and body earthing of transformer?

Neutral earthing refers to the practice of connecting the neutral point of a transformer or electrical system to the ground, providing a reference point for the system voltage and enhancing safety by preventing overvoltages. Body earthing, on the other hand, involves connecting the metallic body of the transformer or electrical equipment to the ground to protect against electrical shock and ensure safety in case of insulation failure. Both methods are essential for maintaining system stability and ensuring the safety of personnel and equipment.


What is the difference between neutral point and earthing?

Earthing point is where conductor is directly connected to ground and its potential is always zero. Neutral is a return path in single phase system and in three phase system Neutral point will have zero potential if all the loads are balanced in the system. In un balanced three phase system even neutral point will have some potential