Best Answer

Base load power in a home is the energy consumed for day-to-day operation of the home, that is not used in response to the outside weather. Base Load is usually thought of Lights, Appliances, and Hot Water, but by extension it is all plug loads, pool pumps, well pumps, computers, etc. Base load is pretty much everything but the energy used for Heating and Cooling.

Study guides

☆☆

Q: What is Base load power?

Write your answer...

Submit

Still have questions?

Continue Learning about Engineering

As the name implies, these are calculations to determine the power factor of a load, where power factor is the ratio of a load's true power to reactive power.

For an inductive load, the current lags the voltage by 90 degs. Hence the power factor for an inductive load is 0. For a capacitive load, the current leads the voltage by 90 degs. Hence the power factor for a capacitive load is 0. For a resistive load, the current and the voltage are in phase. Hence the power factor for a resistive load is 1.

The 'type' of power is determined by the load. If the load is resistive (e.g. a lamp) then the rate at which it consumes energy is termed 'true power', expressed in watts.You seem to be under the impression that reactive power is 'pushed out' into a load. This is quite false; the loaddetermines the power.

A: A transistor has voltage gain as base current is allow to flow. If the load is constant then a DC mirror azimuth path can be plotted as a function of base current and collector current and that is the load line

Use a voltmeter to measure the supply voltage and an ammeter to measure the load current, and use the product of these to determine the apparent power of the load in volt amperes. Use a wattmeter to find the true power of the load in watts. Divide the true power by the apparent power to give you the power factor.

Related questions

Nuclear power plants are capital intensive power plants and hence it is more economic to operate them at high capacity factors (or as base load plants)

Base load power in a home is the energy consumed for day-to-day operation of the home, that is not used in response to the outside weather. Base Load is usually thought of Lights, Appliances, and Hot Water, but by extension it is all plug loads, pool pumps, well pumps, computers, etc. Base load is pretty much everything but the energy used for Heating and Cooling.

Divide Power Load by "Power Factor"

hydraulic lift working on a tractor base upon load vs power

Power factor doesn't necessarily 'improve with the load', but it is determined by the load.

What is the difference between base and peak load?Load is the amount of power in the electrical grid. Base load is the level that it typically does not go below, that is, the basic amount of electricity that is always required.Peak load is the daily fluctuation of electricity use. It is usually lowest in the wee hours of the morning and highest in the early evening. It also varies seasonally.Are base and peak loads provided differently?Base load is typically provided by large coal-fired and nuclear power stations. They may take days to fire up, and their output does not vary. Peak load, the variable part of the electrical supply and demand, is provided by more responsive and smaller plants whose output can be quickly ramped up and down or that can even be quickly turned on and off.

hot load occurs when the power is high and the cold load occurs when yhe power is low

Power factor can be unity. If the load is purely resistive, then the load current and supply voltage are in phase, and the load will have unity power factor.

We have three type of load, 1:resistive load 2:inductive load 3:capacitive load the power associated with resistive load is called true power. the power associated with capacitive and reactive load is called reactive power. true power=I square R reactive power=I square X x may be capacitance or inductance

As the name implies, these are calculations to determine the power factor of a load, where power factor is the ratio of a load's true power to reactive power.

About one tenth, but at a low power factor so that the no-load power might be only 3% of the on-load power.

A no load voltage means the power level that is giving from the output pins power converter. This is when 0% load is given.

People also asked