answersLogoWhite

0

An inductor resists a change in current through the creation/destruction of the magnetic field around the inductor. In an IR Circuit, when the electromotive force (the battery voltage) changes, the inductor will create a voltage to oppose the change, causing the current flowing through the circuit to change gradually over time rather than instantaneously. In an ideal IR circuit, the induced voltage is initially equal and opposite to the change in electromotive force, and it decays exponentially, with a time constant proportional to the inductance of the circuit.

User Avatar

Wiki User

17y ago

What else can I help you with?

Continue Learning about Engineering

What is an AC Transient response?

ac transient analysis is frequency domain analysis.


What is meant by transient analysis?

it is the response of a system with respect to the input as a function of time


Is thevenin's theorem applicable in transient analysis or it should be used only for steadystate analysis?

Yes it is applicable in both. With transient analysis, it is standard to use thevenin or norton equivalents to minimize the circuit before calculating the transient response.


How do you test a toroidal inductor?

To test a toroidal inductor, use an LCR meter to measure its inductance, ensuring the meter is set to the appropriate frequency. Additionally, you can check for continuity by measuring resistance across the inductor's terminals to confirm there are no short circuits. If available, a frequency response analyzer can also help assess the inductor's behavior at different frequencies. Lastly, verify that the core material is not saturating by applying a small AC voltage and observing the inductance stability.


What is Direct axis transient reactance?

Direct axis transient reactance, often denoted as X'd, refers to the reactance of a synchronous machine during transient conditions when the rotor angle changes, such as during sudden disturbances or faults. It represents the machine's ability to produce or absorb reactive power in response to these transients. This reactance is typically lower than the synchronous reactance (Xd), allowing for a quicker response to changes in load or system conditions. Understanding direct axis transient reactance is crucial for analyzing the stability and dynamic performance of power systems.

Related Questions

What is the formula for calculating time required for inductor transient response for build down for the magnetic flux?

Time taken =Distance/Speed


What component limits current in a circuit?

A resistor or an inductor. The inductor limits transient current, not steady state current.


What is transient response in circuit analysis?

transient response is due to exponential behaviour and its die with time,its not permanent.


What is an AC Transient response?

ac transient analysis is frequency domain analysis.


What is difference between natural response and transient response?

The natural response is the inherent behavior of a system when not subjected to any external inputs. It is solely determined by the system's initial conditions. On the other hand, transient response refers to the temporary behavior of a system that occurs when it is subjected to a sudden change or disturbance. The transient response decays over time as the system settles back to its natural response.


With the feedback system the transient response?

With the feedback system, the transient response refers to how the system reacts to sudden changes or disturbances. A well-designed feedback system can help to minimize transient response by adjusting the system to maintain stability and reduce oscillations. The speed and accuracy of the transient response are important factors in determining the performance of a control system.


What is meant by dominant pole in control systems?

The slowest poles of a system (those closest to the imaginary axis in the s-plane) give rise to the longest lasting terms in the transient response of the system. if a pole or set of poles are very slow compared to others in the transfer function, then they may dominate the transient response. If we plot the transient response of the system without accounting for the transient response of the fastest poles, we may find little difference from the transient response of the original system.


What is meant by transient analysis?

it is the response of a system with respect to the input as a function of time


What is use of square wave?

squire wave use for transient response.


Is thevenin's theorem applicable in transient analysis or it should be used only for steadystate analysis?

Yes it is applicable in both. With transient analysis, it is standard to use thevenin or norton equivalents to minimize the circuit before calculating the transient response.


What are applications of transient analysis?

Transient analysis is used in various engineering applications to study and understand the behavior of dynamic systems. Some common applications include analyzing the response of electrical circuits to transient signals, studying the thermal behavior of structures during temperature changes, and evaluating the performance of control systems during transient events.


Why is an inductor used for?

what is an inductor used for