answersLogoWhite

0

By enabling set point tracking in a controller you make the set point of the controller track it's ( or it's downstream block's in cascade) Process value.

This is to enable a bumpless transfer when the controller is switched to Auto from Manual. Say, the controller is in manual mode and operator has entered X value to output and driven PV to Z. And Set point before switching to Manual mode was Y. Now when operator again puts the loop in auto, if the setpoint is Y , the loop will try to maintain that and there are chances that porcess may experience bump in doing that. So to avoid this the setpoint is made to follow PV (Z) so when the loop is again put to Auto SP=PV=Z. so no change in output. Bumpless transfer from MAN to AUTO.

This is achieved by connecting BCAL_OUT of the same block ( or it;s downstream block) to BCAK_IN to the same block ( or it's Upstream block).

By Prasad Kulkarni

Reliance Ind. Ltd., Mumbai, India

User Avatar

Wiki User

13y ago

What else can I help you with?

Continue Learning about Engineering

What is the definition of closed loop control system?

A closed loop control system is a set of mechanical or electronic devices that automatically regulates a process variable to a desired state or set point without human interaction. Closed loop control systems contrast with open loop control systems, which require manual input.


Atc control by deh for turbine?

yes ,when my set point and turbine inlet pr. is match,then no need to varry the load as well as speed,so you can hold the load


What is a derivative control?

Derivative control applied in control engineering, usually for the operation of control valves and its importance came during valve tuning. Derivative control is popularly known as anticipatory control. ( controller starts its control action, by anticipating the trend of present value (PV) of parameter.) Derivative control anticipates parameter values and and it will take control action to control the parameter with in set point. Eg: In a water heating system, water temperature is controlled by controlling steam valve opening. Let set point for water is 80°C, and derivative control will check the status of water temperature and if it is slowly increasing range ( may be due to some load change), controller will starts to control temperature by slowly closing steam valve. ( and vice versa) Actually this type control action just observe at control parameter values and initiates control action.


What is a technicality?

a point of law or a small detail of a set of rules.


Why is a process model typically composed of a set of DFDs?

BECAUSE BUSINESS PROCESS ARE TOO COMPLEX TO BE EXPLAINED IN ONE DFDs

Related Questions

What is set point tracking?

123986514


The difference between set-point and the process variable is called?

The error is the difference between the set-point and the process variable. It represents the deviation that the controller needs to correct in order to maintain the process variable at the desired set-point.


What in the configuration management process represents the snapshot of a set of deliverables at a given point in time?

------in the configuration Management(CM)process represents the snapshot of a set of deliverables at a given point in time?


What point should coaching mentoring be introduced in the onboarding process?

from the out set


What has the author M Borairi written?

M. Borairi has written: 'Genetic design of tunable digital set-point tracking controllers for linear multivariable plants'


How do you set the tracking device to the lowing point in club penguin?

First you have to talk to Rory at the mine and fix the drain pipe. Then you weld the mining cart back together. Finally, put the tracking device into the mine cart and push it into the mine shaft.


What does the set point temperautre mean?

The set point temperature refers to the desired temperature set on a thermostat or control system for a heating or cooling system to maintain the desired comfort level in a space. Once the temperature reaches the set point, the system will either turn on or off to maintain that temperature.


Process dynamics control?

the name itself suggest that dynamics means motion or flow the variables which are responsible for motion includes like temperature ,pressure ,viscosity ,flowrate etc., these variables are at any time with in our control that means to bring the system to stable positions can be achieved by monitoring the parameters which effects the system that in term causes the system to move away from the set point condition there plays a vital role of process dynamics control.


What is the example of process control system?

An example of a process control system is a thermostat used to regulate the temperature in a building. The thermostat measures the current temperature and adjusts the heating or cooling system to maintain the desired temperature set by the user.


How can I efficiently manage my free time tracking and invoicing processes?

To efficiently manage your free time tracking and invoicing processes, consider using time tracking software to accurately record your activities. Set aside dedicated time each day to update your records and invoices. Additionally, create a system for organizing and categorizing your tasks to streamline the invoicing process. Regularly review and analyze your time tracking data to identify areas for improvement and optimize your workflow.


How do you control of shrinkage lycra fabric?

I try shirting cotton lycra fabric shrinkage control but not succses why? finishing stenter m/c befor stenter -10 % shrinkage after sanforise -12% shrinkage why increase? I set shrinkage -6% to -7 % but not set ? which type of process set to control shrinkage on cotton lycra fabric.


Where can you watch match point?

Match Point Set Match Point Set