12" from rear wall, 16" to 18" to side wall, these are measurements to the center of the flange.
Depends on the toilet being purchased, but generally 12 inches from the wall to the center of the toilet flange for a residential toilet.
No, it is not recommended to glue the toilet closet flange to the pipe. The flange should be secured to the floor using bolts or screws, and the toilet is then secured to the flange using wax rings or sealing gaskets. Gluing the flange to the pipe can make it difficult to remove or replace the toilet in the future.
A compression flange is used to connect a toilet to the sewer line.
No. It needs room to move. At least a two inch clearance is preferable.
If leaking at toilet flange, wax ring needs replaced.
The toilet flange should be about 12 inches away from the wall when installing a new toilet.
The toilet flange should be about 12 inches away from the wall when installing a new toilet.
The ideal distance of a toilet flange from the wall is typically around 12 inches.
A toilet flange should be about 12 inches away from the wall for proper installation.
The toilet flange should be about 12 inches away from the wall for proper installation.
The 2003 International Plumbing Code calls for a minimum of 15" clearance from the center of the water closet (toilet) to the nearest side wall or other fixture and 21" clearance from the front of the bowl to the closest wall or fixture.
The toilet flange should be placed about 12 inches away from the finished wall.
The toilet flange is typically located about 12 inches from the wall in a typical bathroom installation.
12" from rear wall....16 to 18 from side wall....measurements are to center of flange
The toilet flange is installed 12" from the FINISHED wall surface to the center of the flange, and 16" (residential), or 18" from the finished wall to center of the flange in commercial,or wheelchair accessible applications.
To replace a broken toilet flange, you will need to remove the toilet, unscrew the old flange, clean the area, install a new flange, and reattach the toilet. Make sure the new flange is securely in place before reattaching the toilet.
To change a toilet flange, you will need to remove the toilet, unscrew the old flange, clean the area, install a new flange, and then reattach the toilet. It is important to ensure the new flange is securely in place before reattaching the toilet to prevent leaks.