answersLogoWhite

0

A compression flange is used to connect a toilet to the sewer line.

User Avatar

Wiki User

15y ago

What else can I help you with?

Related Questions

How do you remove the broken closet flange from inside an ABS black pipe or is there an adapter that would fix the outside of the pipe?

What is actually broken the flnge ring rusted out and broke or the abs pipe? Abs pipe/flange broken: Use a ram bit to cut it out and install a new one. http://www.plumbingsupply.com/pvcsaver.html use a compression or expansion flange http://www.plumbingsupply.com/toiletflanges.html or just cut the pipe and put in a new one Flange ring rusted/broken: install a toilet flange repair ring or a spanner flange.


Difference between T-beam and rectangular beam?

Dasign of T- beam is some what similar to rectangular beam, in design slab thickness is determined first. the slab is acts as compression flange in designing the beam. the flange acts as compression zone, which is balance by steel embeded in the bottom web of the beam. slab thickness= t, in. effective depth= d, in. width of web= b', in. flange width= b, in. width of flange should be least of the three alternatives, 1. span/4. 2. b' + 16t. 3. centre to centre spacing of beams.


What is SOFF flange?

Slip-On Flat Face Flange. It means the face of the flange, the surface the physically touches the next flange is flat as opposed to raised (SORF Flange)


How do you fit WNRF flange onto an RTJ flange?

Not. There's no way to connect a WNF to an RTJ flange.


What is a RFFE flange?

Raised face flange end


How do you get the center to center distance of a flange?

If it's wide flange, it's from center of web to web distance. Other structural members, it's center of flange to center of flange.


What is WNRF flange?

Weld Neck Raised Face flange


Why does a drain flange have holes in it?

To allow floor flange bolts to have a place to fit and to anchor the flange to the cement /wood decking


How do I install a shower drain flange?

To install a shower drain flange, first remove the old flange if necessary. Then, apply plumber's putty or silicone sealant around the underside of the new flange. Insert the flange into the drain opening and secure it in place with screws. Finally, connect the drain pipe to the flange and test for leaks.


How can I replace a toilet flange?

To replace a toilet flange, you will need to remove the toilet, unscrew the old flange, clean the area, install a new flange, and then reattach the toilet securely. It is important to ensure the new flange is level and properly sealed to prevent leaks.


What RJ flange?

RJ flange is fabricated with a ring groove on the surface of the flange with the specification that has been set based on international standards.


What is an offset closet flange?

It offsets the floor flange bolts by 2"