0
What else can I help you with?
Can you put a 13 seer condenser on a 10 seer evaporator?
Yes you can but you will NOT get the 13 seer rating from the condenser..
16 seer coil with 13 seer condenser?
The seer doesn't matter if it will function or not it will. Just keep in mind that you will only get 13 seer max out of system
Can you put a 14 seer condenser on a 10 seer evaporator?
Yes but you won`t get 14 SEER.
Can replacing a 10 seer heat pump with a 13 seer hp affect the air handler that's 10 seer?
I have been told that if you are going to replace a 10 seer with a 13 seer, you have to change the coil on the inside unit to work with a 13 seer heap pump. In order to gain the extra energy efficiency yes you would need to replace the air handler as well.
Can you use a 13 seer coil evaporator with a 10 seer condensor?
No,The differences are to great.You will end up with more problems than you want.10 seer condensor cant keep up with 13 seer evap.Suction pressure would be to much,and you never would acheive cooling temps.
Can you put a 13 seer condenser on a 10 seer evaporator?
Yes you can but you will NOT get the 13 seer rating from the condenser..
16 seer coil with 13 seer condenser?
The seer doesn't matter if it will function or not it will. Just keep in mind that you will only get 13 seer max out of system
What is the seer rating on a model 13aja42b01 condenser?
your unit should be a 13 seer 3.5ton
Need info on 13 seer split heat pump?
I have a4 ton air handler and a three and a half ton condenser 13 seer goodman heat pump will my seer change
Can you put a 14 seer condenser on a 10 seer evaporator?
Yes but you won`t get 14 SEER.
How does condenser size affect the seer?
The size of a condenser doesn't directly affect the SEER rating. SEER (Seasonal Energy Efficiency Ratio) is a measure of the efficiency of an air conditioning system. The higher the SEER rating, the more efficient the system is at cooling. The size of the condenser will impact how well the system can cool a space efficiently, but it is not the sole factor in determining the SEER rating.
What is the seer rating for a 2 ton Goodman ck24-1b condenser?
10 SEER is the rating for the Goodman CK24-1B.
What is the SEER rating on a comfortmaker AC unit Model ACS036A2C1 1997 year unit?
That is a 9 seer condenser
Can the overall seer rating be higher than the seer rating on the condenser?
If the term "condenser" is reffering to the "condensing unit", the answer is yes. The combination of indoor coils and outdoor units is how the overall SEER is derived. The ARI website lists many combinations of these units.
What size condenser do you need to match a 5ton 10 seer coil that is at least 9 years old?
A 5 ton 10 SEER condenser will do it, but you can no longer buy a 10 SEER condenser. Replacing the condenser and not matching it with the proper evaporator coil will nullify the SEER value stated on the new unit and your actual SEER and EER will be anyone`s guess so do not pay any attention to it. The coil is the least expensive component of the 3 and now would be the time to upgrade away from R 22 which is currently being phased out and will become very expensive in the near future. Something to consider if that 9 year old coil were to fail before the new condenser does or if you were to develop a troublesome leak. But if you are dead set against the coil replacement I suppose a 4.5 or 5 ton, depending on the climate where you live will work. Get the lowest SEER currently available (13) since it will mean nothing.
What are the dimensions of a 13 seer coil?
The dimensions of a 13 SEER coil can vary depending on the manufacturer and model. Typically, you can expect a coil with a 13 SEER rating to be around 18-24 inches tall, 18-24 inches wide, and 18-24 inches deep. It is always best to refer to the specific product specifications provided by the manufacturer for accurate dimensions.
Can you match a 3.5 ton air handler by Gibson 13 seer with a 4 ton 13 seer Rheem air handler?
You can't match an air handler to an air handler. I assume you meant a 3.5 Ton A/H to a 4 Ton condenser. The answer is no. If the A/H was 4 Ton & you had a 3.5 Ton condenser you could with an expansion valve setup. You should really match equipment when possible & I highly recommend using a qualified technician.
