0
What else can I help you with?
What is ethernet cable?
Ethernet cable is typically 8-core category 5 (CAT5) cable with RJ45 plugs on each end, capable of bi-directional network transmission up to 100m. CAT5e and CAT6 are better quality cable for network communications over longer distances.
How do you make a phone cable terminated RJ45 on one end and RJ11 on the other?
terminate the RJ11 end and on the RJ45 end crimp the 4 wires in the 4 middle slots. run the wires straight through, no crossover
What is the function of the twisting wires in a CAT 5 cable?
Cancels the noise.
What is the minimum cable type 100base TX specifies?
Type 1A STP or Cat 5 UTP.
How does a cable-car mechanism work?
•A cable runs continuously in a channel between the tracks, which are located just below the street. The cable is controlled at a central station, and usually moves about 9 miles (14-5 kilometers) per hour. On the underside of each cable car is an attachment called a "grip." When the car operator pulls a lever, the grip latches onto the moving cable and is pulled along. When the operator releases the lever, the grip disconnects from the cable. The car comes to a halt when the operator applies the brakes. Also called an endless ropeway
What is the name of Rj45?
An RJ45 cable is also known as an Ethernet cable
What do you mean by rj45 cable?
Rj 45 refers to the ends of the cable. The type of end it has. The cable itself is cat 5.
What type of cable would you use to connect a pc nic to an rj45 Ethernet port of a cisco router?
cat 5 Ethernet cable
What type of connector is most often used to connect machines to hubs and switches?
RJ45 female and males.
Which tools would you need to wire an RJ45?
RJ45 do terminate network cables. The process of wiring them requires a crimping tool and a UTP cable stripper. The former for trimming the end of the cable and squeezing the RJ45 after connecting. The latter helps in stripping the jacket of the cable.
What type of connector does a modem use?
On a DSL Modem you will find an RJ45 (Resistor Jack) connector with the help of which you can connect to an ISP of your choice.
What type of RJ45 UTP cable is used between switches?
Crossover cable
What is the cable is used to connect a host to a hub?
RJ45
Are Category 3 utp cables are used for ethernet star networks?
A category 3 cable is totally inappropriate for a modern network. You should install at least category 5.A category 3 cable is totally inappropriate for a modern network. You should install at least category 5.A category 3 cable is totally inappropriate for a modern network. You should install at least category 5.A category 3 cable is totally inappropriate for a modern network. You should install at least category 5.
What the categories of UTP cable?
Category 5 enhanced category 6 category 7
What type of cable would you use to connect a PC directly to a router?
Use a CAT-5, also known as an Ethernet cable.
What kind of cable does have a internet have and intranet have?
for internet cable it is called RJ11 and for the intranet cable it is called RJ45
