0
What else can I help you with?
What is the different between RJ9 and RJ10 connector?
An RJ11 connector is a six-position two-conductor connector. An RJ9 connector is a term for a four-position, four-conductor connector that is often used to connect a handset to the base of a telephone.
How do you connect Copper pipe to PVC?
You can often find a modern connector such as Sharkbite or Qwest fitting to do this.
Why do electrical machines need switches?
Electrical machines often require switches to control the flow of electricity, allowing the machine to be turned on and off. Switches also enable the machine's functionality to be adjusted, such as changing speed or direction in the case of a motor. Additionally, switches provide a safety mechanism by disconnecting power in case of emergencies or maintenance.
What is the difference between cross connect and inter connect in structured cabling system?
Cross connect is often used when telecommunication equipments are connecting to each other. For example switches to switches and/or routers, PBX to carrier lines, etc. Inter Connect is used when you area connecting to end users or to the computer/storage equipment in a Data Center. No matters what ends you are connecting: patch panel, switch, desktop end user.
Used to reduse friction?
A lubricant. In machines, some kind of oil is often used.A lubricant. In machines, some kind of oil is often used.A lubricant. In machines, some kind of oil is often used.A lubricant. In machines, some kind of oil is often used.
What is the bar on a switch made of?
I'm assuming you mean the conducting bar or blade on an electrical switch (disconnect). The smaller switches for 600V and under often use copper. Larger switches that electrical utilities use can be copper or aluminum. The aluminum blades usually have hardened copper ends on them where they connect into the jaw end. With high copper prices, new switches may be using different metals.
How often are simple machines used?
they use simple machines for everything and every where.
How often do slot machines hit jackpot?
Not very often!
Do dimmer switches reduce bulb life?
Answer Actually dimmer switches extend the life of a light bulb, especially if you dim them often.
What are the differences between European light switches and those used in other regions?
European light switches are typically smaller and more compact compared to those used in other regions. They often have a flat design with a rocker switch, while switches in other regions may have a larger toggle switch. Additionally, European switches are usually positioned horizontally on the wall, while switches in other regions are often mounted vertically.
Acl apply on switches or router?
ACLs (access control lists, often used to block certain traffic) are usually applied on routers. There is a limited support for ACLs on switches, too.ACLs (access control lists, often used to block certain traffic) are usually applied on routers. There is a limited support for ACLs on switches, too.ACLs (access control lists, often used to block certain traffic) are usually applied on routers. There is a limited support for ACLs on switches, too.ACLs (access control lists, often used to block certain traffic) are usually applied on routers. There is a limited support for ACLs on switches, too.
When is the uplink connection used on a switch?
Uplink connections are typically used to connect the switch to a higher level switch, that is more powerful and closer to the backbone.On basic switch models, the regular ports are MDIX ports, meant to connect directly to a PC. The Uplink port is then an MDI port, which can connect (with a straight cable) to an MDIX port on a different switch. Often the highest numbered port (8, 16, or 24 for instance) has one MDIX port in the regular set and an MDI uplink next to it, but you can only use one of these two.You can use a crossover cable to connect MDIX to MDIX or MDI to MDI port.On more modern switches, ports are often MDI/MDIX autosensing and this reason for existence of uplink ports has passed (all Gigabit Ethernet has this, and many 100 Mbit Ethernet).In the mean time, however, switch models have come into being which have faster speed uplink ports. For instance, 10 Mbit switches with 1 or 2 100 Mbit ports to connect to the core network, or these days 100 Mbit switches with a few Gigabit ports.
