0
A Flux Valve is a magnetic sensory device that electrically transmits information to an aircraft's compass system regarding its orientation relative to Earth's magnetic field. This information, in the form of three separate electrical signals tied to a common return, is used to generate a visual indication to the flight crew regarding the heading of the aircraft relative to magnetic north.
What else can I help you with?
Difference between flux linkage and flux leakage?
i) leakage flux is those flux which goes through the air and linkage flux is those flux whose go through the cell. ii)leakage flux is the loss at flux but linkage flu is warning flux. iii)leakage flux is cause of eddy current loss and linkage flux is case of copper loss.
What is the difference between magnetic flux magnetic flux densitymagnetic flux linkage?
light speeeed mofos
Air gap flux is termed as useful flux why?
Basically useful fluke is the flux that flows with in the magnetic circuit of an armature. That is why when there is an air gap the flux enters the armature which makes it useful flux! Hope that answers your question!
Is there any device which can convert constant magnetic flux into variable flux?
A generator, in general.
Is flux only produce in ac supply or in both ac and dc?
Flux is produced in both AC and DC systems, but the nature of the flux differs. In DC circuits, the magnetic flux is constant, as the current flows in one direction. In AC circuits, the magnetic flux changes direction and magnitude periodically, resulting in a time-varying magnetic field. Thus, while both types of current can produce flux, AC generates a dynamic flux due to its oscillating nature.
Where is a flux valve installed?
ln a extreme aircraft wing
Which device that indicate the direction of the magnetic flux?
A compass is a device that indicates the direction of the magnetic flux. It aligns with the Earth's magnetic field and points towards the magnetic North Pole.
How do you change a mixing valve in a faucet?
mixing valve in a faucet: ok I will assume you are refering to a shower valve, that is the only faucet w/a mixing valve: shut off the hot and cold water. cut out valve or unsweat it. clean and flux new valve, pipe and fittings(if used) sweat in new valve
Where are the spark plugs on a 2011 jeep compass?
They are under the coils through the top of the valve cover.They are under the coils through the top of the valve cover.
How do you set the timing on a 1991 xr200r?
Turn the rear gear valve to the 'on' position, then adjust the flux capacitor regulation system freely.
Difference between flux linkage and flux leakage?
i) leakage flux is those flux which goes through the air and linkage flux is those flux whose go through the cell. ii)leakage flux is the loss at flux but linkage flu is warning flux. iii)leakage flux is cause of eddy current loss and linkage flux is case of copper loss.
Why does the compass point north in the southern hemisphere?
The direction of magnetic flux or lines of force is from north polarity to south polarity, and a compass needle will always align with that direction, wherever it is used. Since the magnetic polarity of the location we call Magnetic North is a south, a compass needle will point in that direction.
What is leakage factor?
The Ratio of the total flux ( flux in iron path) to the useful flux (flux in air gap)
Having trouble sweating the shower joint in a temptrol shower valve?
You have the guts out of the control correct? Re clean the parts, flux and heat the body of the control.
How do you install a shut off valve?
To install a shut off valve, first turn off the water supply to the area where you will be working. Cut the pipe where you want to install the valve using a pipe cutter. Clean the ends of the pipe and the valve with sandpaper. Apply flux to the pipe and valve, then solder them together using a torch. Allow the joint to cool, then turn the water supply back on to test the valve for leaks.
Difference between mutual flux and leakage flux?
when a current flow through the coil then flux produced around the coil . if the flux linked same produced coil only then the flux is said to be leakage flux. flux produced by one coil ,but linked with another coil then the flu is said to be mutual flux.
Difference between leakage flux and mutual flux?
when a current flow through the coil then flux produced around the coil . if the flux linked same produced coil only then the flux is said to be leakage flux. flux produced by one coil ,but linked with another coil then the flu is said to be mutual flux.
