In manual star delta starter, the change over from star to delta does not happen automatically. The operator or user puts on the starter, and after few seconds he pushes a lever or handle to change over to Delta.
In automatic method, change over happens from star to delta using an automatic preset timer.
Consult with the owner manual for the correct steps in sequence.
The starter motor is at the rear of the engine.
in 4 point starter we use a protactive rasistance to control the speed of motar in 3point starter speed is uncontolled
There is a link below for the DOL starter circuit.
No, an electrical starter can not turn without an electrical source.
I have never heard of an Automatic Starter. Are you talking about a Remote Starter? Now if you are asking if an A/T equipped Mazda and a Manual Transmission equipped Mazda have the same starter, the answer is yes, they are identical.
If you really don't know where a starter is, I suggest obtaining a repair manual.
Library
The drivers manual
The starter location for a 1999 TLC is under the intake manifold according to the Toyota shop manual.
look in your owners manual.
The starter is located near the bottom front of the engine. You can follow the positive battery cable, from the battery directly to the starter.
To begin with, check the box or manual of the remote car starter to see if the product is compatible with your car. Use a soldering iron to connect wires following the manual. If there is more than one wire for ignition, accessory or the starter, use a relay to connect them.
a diagram of the starter can be found in a haynes manual or look yourself. Most are mounted under the firewall or enging on the left side where the serpentine belt is. check out the haynes manual that will help you out
Buy a Haynes Repair Manual or a Chilton Repair Manual for a 2000 Firebird. Both have clear schematics for all electrical systems.
Remove the positive battery cable from your 1987 Chevrolet Blazer battery. Remove the starter cables from the front of the starter. Remove the starter retaining bolts. Reverse the process to install the new starter.
you would need a repair manual.