0
What else can I help you with?
What is the power dissipation for TTL?
power dissipation of a logic circuit is usually defined as the supply power required for the gate to operate with a 50% duty cycle at a specific frequency.
What is Prony brake dynamometer?
proney brake dynamometer is a device use to measure engine power
What will happen when a machine run at low voltage?
The results of operating machinery at a reduced voltage depends on the type of machinery and the power supplies used in the equipment. In many cases, the current drawn will increase to allow a device to operate at a constant power. In others cases such as heating, thermostats will switch on heating elements for longer periods of time to achieve a required temperature. In some simple machines, motors will deliver less power because of the reduced voltage. Although most equipment will operate at lower than rate voltages, there will be a voltage threshold below which it will not operate at all.
Current will flow as long as the power supply is good and there's a power-control device true or false?
Current will flow as long as there is a difference of potential (a voltage) and a path for current to flow. So no power-control device is required for current flow but yes it will flow with a power control decive.
What's passive transducer?
Passive transducers are the transducers which requires an external power supply to operate and the output is a measure of some variation in passive.
What is the required power output, measured in watts, for a well pump to operate efficiently?
The required power output for a well pump to operate efficiently is typically measured in watts.
Can you use a 12v dc 1a power supply on device that requires 12v dc 3200ma?
No, the 1A power supply does not provide enough current (3200mA required) for the device to operate properly. You need a power supply that can deliver at least 3200mA to meet the device's power requirements. Using an underpowered supply may result in the device not functioning correctly or potential damage.
How do you operate a push button switch to turn a device on or off?
To operate a push button switch, simply press the button to turn the device on or off. Pressing the button once will toggle the device's power status.
Do devices operate on power or current?
Electrical devices use power to operate, but power does not exist without current. Alternately, if current is flowing, power is being stored or used by some electrical device.
Why the name 8085 is given?
The name 8085 was given to the next generation of the 8080 to indicate 1.) that it was a next generation device and 2.) that it only required a single +5V power supply to operate.
Can a 127 volt device operate on 110 volt power?
Yes, a device rated for 127 volts should operate on 110 volt power without issues. The device may run slightly slower or with slightly reduced performance due to the lower voltage, but it should work safely.
What is passive device?
A passive device is a component that does not require power to operate. A lightning arrester on high voltage lines would fall into this category.
What type of power cord is required for a device that operates on 120V AC power?
The device that operates on 120V AC power requires a power cord with a standard 3-prong plug.
What is the amperage required for a device that operates at 7500 watts?
The amperage required for a device that operates at 7500 watts can be calculated by dividing the wattage by the voltage of the power source. If the device operates at 120 volts, the amperage required would be 62.5 amps.
Can you use a 9v 1500ma on 9v 500ma device?
Yes. (For any pairing of power supply and device, as long as the voltages are a match (in your case: 9v), and the output (in amps or milliamps (A or mA) of the power supply IS EQUAL TO OR GREATER THAN the current required by the device (in your case 1300mA or higher) then you will be fine. Yes it is suitable: The OUTPUT VOLTAGE (5v, 9v, 12v, etc) of a power supply MUST BE EQUIVALENT to the required voltage of the device to which it is to be connected, whereas the output CURRENT (500mA, 1A, 1500mA, 2A... etc) offered by the power supply MUST BE AT LEAST EQUAL TO OR GREATER THAN the current required by the device to which it is to be connected. (in your case, for example, as long as the power supply is rated at 9v, you could use one that has a rating of 1300mA, 1400mA, 1500mA, 1A...and so-on, without any damage to either device)
Can you use a power cord that uses less mA than the device calles for?
It is not recommended to use a power cord that provides less current (measured in mA) than what the device requires. Doing so may result in the device not receiving enough power to operate properly, potentially causing damage to the device or the power cord. It is best to use a power cord that meets or exceeds the current requirements of the device.
Can I use 1.5 amp power supply to operate a 220 miliamp device?
yes, as long as the voltage is the same, the device will only take what it needs as far as amperage.
