0
to make it insulated and rust free Gi spray is used.
Fiberglass is easy to install and can be purchased in insulation sleeves. The insulation is comprised of inorganic fibers, which are bonded with special resin. An aluminum-foil facing or vapor retarder is attached. The insulation is usually available in 3-foot sections.
What else can I help you with?
What is hammering in steam header's how can you avoid it?
condensate,bleed line of all condensate
What is balancing line in boiler?
The balancing line in a boiler refers to a specific operating point on a steam generation curve where the heat input from fuel combustion matches the heat output from steam generation. This line helps maintain efficiency and stability within the boiler system, ensuring that the steam pressure and temperature remain within desired limits. Properly managing the balancing line is crucial for optimizing performance and preventing issues such as overpressure or inefficient fuel use.
What did Robert Stephenson invent?
Robert Stephenson Invented The Rocket (Steam line train)
Dry saturated steam is in a semigaseous state?
No. If you refer to the Temperature/ specific entropy (T - s) diagram for steam, the line segment to the right of the critical point (the point of zero gradient) of the curve is called the dry saturated line and the left segment is the satuated vapour line. As self-explanatory as it sounds, dry saturated steam is on the dry saturated line depending on the given temperature or pressure. The quality (dryness fraction) on the dry saturated line is by definition 1, that means there is no portion of it as vapour. Hence it is in a fully gaseous state.
What is the application of boiler stop valve?
Stop Boiler Valve (or Crown Valve) is installed on an outlet line of a boiler. It's purpose is isolation of a boiler from a downstream steam line. Its position may be either open or close, it cannot be used for throttling of steam.
How do you fix Chevy Suburban vapor lock?
Try insulating the fuel line with a NON-FLAMMABLE material as it passes by the engine up to the fuel pump. Especially protect the fuel line from the heat of the exaust manifold.
What is the difference between a line isolator and a bus isolator?
If I'm interpreting the question accurately, a "line isolator" is an insulating standoff for transmission or distribution cable. A bus isolator is an insulating standoff for tubular or bar bus as is normally seen in a substation switching yard.
What is the definitions of insulator?
The act of insulating, or the state of being insulated; detachment from other objects; isolation. 2. (Elec. & Thermotics) The act of separating a body from others by nonconductors, so as to prevent the transfer of electricity or of heat; also, the state of a body so separated.
What is the name of Sussex steam railway?
Bluebell line
What is a symbol for an electromagnet?
A common symbol for an electromagnet in circuit diagrams is a coil of wire with a core material, such as iron, placed within the coil. The symbol typically includes a zigzag line to represent the wire coil and a straight line through the center to represent the core material.
Why balancing line is providing in steam turbine?
for thrust balancing.
What is leakage current in underground transmission line?
The leakage current in underground transmission line are any two conductors separated by an insulating medium. It constitutes a condenser and a capacitor.
Why boiler drum steam pressure always different from boiler main steam line pressure?
Due to pascals law
Write short notes on triple point of water?
Triple point is a point on the phase diagram representing a particular pressure and temperature at which the solid, liquid, and vapour can co-exist in equilibrium.For water the values of pressure and temperature corresponding to Triple point are 4.58 mm of hg(610.42pa),273.16K.There are three lines drawn on the phase diagram.They are:1. Ice Line2. Steam Line3. Hoar Frost Line1. Ice Line: The line PB is called Ice Line.Along the line PB the solid and water are said to be equilibrium.2. Steam Line: The line PA is called Steam line.Along the line PA the water and steam are said to be equilibrium.3. Hoar Frost Line: The line PC is called Sublimation line (or) Hoar Frost Line.Along the line PC the Ice and Steam are in equilibrium.The Intersection of these three lines is Triple point.
What is NB in terms of steam line?
NB means nominal bore
What is a pressurized supply line?
A supply line filled with air, gas, steam, or liquid that's under pressure.
Why a reducing orifice in the steam supply line of such an evaporator?
A reducing orifice in the steam supply line of an evaporator is used to control the flow rate of steam entering the evaporator. This helps in maintaining the desired operating conditions and ensuring efficient heat transfer within the evaporator. Additionally, it can help prevent overheating and equipment damage by limiting the amount of steam entering the system.
