0
This is the designation for a type of flexible cord ("junior hard service cord") for electrical uses up to 300 volts, having thermoplastic insulation of the conductors and a thermoplastic outer covering. The "W" designates compliance with requirements for outdoor use (water and weather resistant), suitable for use in wet locations. There may also be markings that indicate resistance to sunlight (UV) deterioration.
Approved cords should have durable markings every 24 inches showing the type, size of conductors and number of conductors.
The permitted amps through an SJTW depends upon whether it has 2 current-carrying conductors or three or more, and the size of the conductors. An 18AWG/2 is 10A, and 14AWG/3 is 15A, for example (at ambient T of 86F, 30C).
NEC Table 400.4, rule 400.6
What else can I help you with?
How is fuse rating done?
amps - how much electrical output
What reason for bulb blowing in an electrical circuit?
Too much current for the rating of the bulb.
What is the VA rating for common appliances?
For all intents and purposed the VA rating is the same as the wattage rating of appliances. VA is an electrical classification for Volt Amps. The formula for watts is, Watts = Amps x Volts.
What is meant by circuit fusing rating?
Circuit fusing rating refers to the maximum current that a fuse can safely carry without blowing under normal operating conditions. It is a critical specification that ensures the protection of electrical circuits by preventing overloads and potential damage to electrical components. The rating is determined based on the fuse's design and materials, and it is essential for selecting the appropriate fuse for a specific application to ensure safety and reliability.
What is the voltage rating for ASTM F2413-11 safety shoes?
The ASTM F2413-11 standard includes specifications for protective footwear, including various electrical hazard ratings. Safety shoes that meet this standard may be rated for electrical hazards, typically classified as EH (Electrical Hazard) footwear. This means they are designed to provide a certain level of protection against incidental contact with live electrical circuits, but they do not have a specific voltage rating. Instead, they are tested to ensure they can withstand a minimum voltage level, generally around 18,000 volts for a short duration.
What does sjtw a mean on an electric extension cord?
Servive jr. Jacket thermal all weather
What does sjtw stand for?
SJTW stands for Service Junior Thermoplastic Weatherproof. It is a type of power cable commonly used for outdoor applications due to its resistance to water and weather.
What is the 10-3 amp rating for this electrical appliance?
The electrical appliance has a 10-3 amp rating.
What is the 10/3 amp rating for this electrical appliance?
The electrical appliance has a 10/3 amp rating.
What is the 6/3 amp rating for this electrical appliance?
The 6/3 amp rating for this electrical appliance is 2 amps.
What is the maximum amperage rating for an electrical outlet?
The maximum amperage rating for a standard electrical outlet is typically 15 or 20 amps.
What is the heat rating of electrical tape?
The heat rating of electrical tape is typically around 80 degrees Celsius or 176 degrees Fahrenheit.
What is the 1/0 wire amp rating for a specific electrical application?
The 1/0 wire amp rating for a specific electrical application is typically around 200 amps.
What is the benefit of star rating on electrical appliances?
because they consume less energy so it is the benefit of star rating
What does the power rating of an electrical appliance mean?
The power rating of an electrical appliance represents the rate at which the appliance uses electrical energy. It is typically measured in watts and indicates how much electricity the appliance consumes when it is in use. Higher power ratings suggest that the appliance uses more energy.
What is the maximum current rating for the circuit breaker in this electrical panel, specifically in relation to the keyword "60 amps"?
The maximum current rating for the circuit breaker in this electrical panel is 60 amps.
How is fuse rating done?
amps - how much electrical output
