False-setting is when cement abnormally and prematurely sets.
Setting begins to occur after the concrete is mixed and even before pouring. The cement in the concrete begins to stiffen after mixed with water. The concrete is beginning to change from liquid form to solid form. During the setting process, the concrete does gain strength, which is the beginning of the hardening process. When the water ingredient is added to the concrete mix, the concrete is still pliable and flexible, sort of a paste. There is two stages of setting: initial and final setting. Initial setting is when the concrete loses it flexibility and begins to harden. Final setting is when the concrete can sustain some load, but still has some moisture within the mixture. Hardening
Setting indicate the beginning of stiffening of concrete ,in this case the concrete has not any strength and any cracks if occur can be re unit the concrete in this state just like a dough bread afar setting the concrete stiff and become hard and get strength and any cracks if happen cant be re unit
It is not rain forced but re-inforced cement concrete. It means the concrete after setting and hardening.
before plcement in any mold with out compction is the fresh concrete. or just after plceing the concrete before initial setting is the fresh concrete.
yes I'm also little confused ..
False-setting is when cement abnormally and prematurely sets.
False set occurs when cement appears to set but can still be remixed and flow, while flash set is a rapid and irreversible setting of cement that cannot be reversed. False set can be corrected by adding more water and re-mixing, while flash set requires the cement to be discarded and fresh cement to be used.
Setting begins to occur after the concrete is mixed and even before pouring. The cement in the concrete begins to stiffen after mixed with water. The concrete is beginning to change from liquid form to solid form. During the setting process, the concrete does gain strength, which is the beginning of the hardening process. When the water ingredient is added to the concrete mix, the concrete is still pliable and flexible, sort of a paste. There is two stages of setting: initial and final setting. Initial setting is when the concrete loses it flexibility and begins to harden. Final setting is when the concrete can sustain some load, but still has some moisture within the mixture. Hardening
True
Yes, concrete is commonly used for setting fence posts as it provides stability and durability to the structure.
Setting indicate the beginning of stiffening of concrete ,in this case the concrete has not any strength and any cracks if occur can be re unit the concrete in this state just like a dough bread afar setting the concrete stiff and become hard and get strength and any cracks if happen cant be re unit
The noun 'setting' (a gerund) is a concrete noun when used for the setting of a gemstone; or the setting for the controls of something; the surroundings where someone or something is; a word for a physical place or thing.The noun setting is an abstract noun as a word for the setting of a story, play, movie, etc.; the arrangement of dishes on a table (the dishes are concrete, the arrangement is a concept).
The different setting forms for concrete include slab, beam, column, and wall forms. These forms are used to shape and support the concrete as it hardens and cures into a solid structure.
It is not rain forced but re-inforced cement concrete. It means the concrete after setting and hardening.
Right after sunset is the best time to use or set the auto flash setting.
Silpozz Micro silica can slightly delay the setting time of concrete, but this can be adjusted with admixtures to meet project needs.