0
What else can I help you with?
What does 4 to 20 milliamps mean?
4-20 milliamps refers to a standard analog signal that is used in many instrumentation circles. For example a tank level transmitter will send a 4 milliamp signal when the tank is empty and a 20 milliamp when the tank is full. 12 milliamp would indicate 1/2 full. Anything less than 4 milliamps is considered a broken wire or failed powersupply. This is the standard often used in the US. Germany often uses 0 to 20 millamp signals.
What is mAh?
mAh = milliamp hours, which is battery capacity
If a is less than b and b is less than c what is less than c?
You already said the answer that b is less than c
What is the normal insulation leakage current in three phase motor?
zero insulation leakage is known as a ground fault AC, DC, single phase, 3 phase .... same answer on a damp day or with water present it may be a bit higher than zero there is no perfect insulation if you have more than a milliamp you have problems
Why input current of USis less than Output current?
Why input current of USis less than Output current?
What is the decimal equivalent of milliamp?
1 amp = 1000 milliamp, so 1 milliamp = (1/1000) amps = 0.001 amps
Is a 100 milliamp RCD more sensitive than a 30 milliamp RCD?
No, the 30 mA one is the more sensitive because it is the only one that will operate at currents between 30 and 100 mA.
How many watts are in a 1 watt led light?
It depends on how many Milliamp you push the 1w led. Most 1w leds are not 1w of power but less, so that they dont burn out fast. So the answer would not be 1w but truely less than 1w.
Is a milliamp eaqual to 1000 amperes?
1000 milli (meaning 1/1000) ampere does equal one ampere
What does 4 to 20 milliamps mean?
4-20 milliamps refers to a standard analog signal that is used in many instrumentation circles. For example a tank level transmitter will send a 4 milliamp signal when the tank is empty and a 20 milliamp when the tank is full. 12 milliamp would indicate 1/2 full. Anything less than 4 milliamps is considered a broken wire or failed powersupply. This is the standard often used in the US. Germany often uses 0 to 20 millamp signals.
How many amps is 12 milliamp?
12 milliamp is 12 thousandths of an amp or 0.0012
What is One thousandths of an ampere?
Milliamp
Is it okay to use a 12 volts 600 milliamp DC power supply with a device that says it needs 12 volts 1 amp?
No, 1 amp is 1000 milliamp your power supply will only deliver 600 milliamp or .6 of an amp.
How do you write 1 tenth of a milliamp?
.0001
The units for current?
ampere (A) or milliamp (mA)
Will a 9 volt 800 milliamp adapter work with a 9 volt 400 milliamp device?
Yes, the 9 volt 800 milliamp adapter will work with the 9 volt 400 milliamp device. The device will only draw the amount of current it requires, so having a higher amperage rating on the adapter is fine. The voltage should match to ensure compatibility.
What is mAh?
mAh = milliamp hours, which is battery capacity
