answersLogoWhite

0

What else can I help you with?

Related Questions

What is use of logic probe in electronic?

we use logic probe in circuit because logic probe is use to indicate where signal is high or low on ic chip.


What are the two standard voltage levels that are acceptable for a digital signal?

measuremittens A2: Generally, in positive logic, a pulse over +3.5 volts is considered a "high"; a "one". Below that is considered a "low"; a "zero".


How do you say the word ''Logic'' in latin?

Logicus (LOW-gee-coos)


Which logic function has the output low only when all inputs are high?

NAND


Which logic circuit is low energy logic circuit ECL OR TTL?

I believe you mean low power, not low energy.TTL is typically lower power than ECL, but not always. Some TTL devices have been higher power than similar ECL devices.


What is positive logic system?

It means that an electronic circuit is designed in such a way that a 1 is represented by a HIGH voltage, and a 0 is represented by a LOW voltage. Also known as active-high. If it's the other way round, it's called active-low, or negative logic.


What is the voltage in a 7400 quad nand gate?

The 74xx series of integrated circuits use 5 volts. This is common in TTL (Transistor to Transistor Logic) circuits.For inputs:The 0 or Low Logic level is anything less than 0.8vThe 1 or High logic level is anything from 2v up to the supply or 5v level.Voltages between these trigger points in the logic, should be avoided to prevent spurios operation.The output levels are generally5v = logic level 1 or High0v = logic level 0 or Low.


What is the function of a logic probe?

To tell you the state of a logic signal, when the state changes are infrequent and the cost of an oscilloscope or logic analyzer would be inappropriate/excessive.


What is logic 0 and logic 1?

Logic 0 and logic 1 are the two states in digital (or binary) logic. A binary numbering system has but two numbers: 0 and 1. In contrast, we use a decimal system with 10 numbers: 0 to 9. The area of algebra that addresses binary (2-state) logic is called Boolean. In Boolean a logic 0 may be refered to as 'low', 'off' or 'false'; a logic 1 as 'high', 'on' or 'true'. Boolean logic is the foundation of digital electronics.


How cmos logic families works in negative temperatures?

CMOS logic families tolerate low temperatures because they are designed to. I suppose the why is not public because those would be trade secrets.


Difference between logic probe and logic pulser?

A logic probe is used to test and troubleshoot digital circuits by indicating the logic state (high/low) of a particular point in the circuit. A logic pulser, on the other hand, is used to generate a known pattern or pulse at a specific point in the circuit to stimulate and test the behavior of the circuit under different conditions. In essence, a logic probe is for observation, while a logic pulser is for stimulation.


When a tri state logic device is in the third state the how will the current flow?

it wil represent a low impendence