0
What else can I help you with?
What logic gate might be called the all or nothing gate?
AND gate is an all or nothing gate because in able to have an output of logic 1,all of the input must be all logic 1 or else the output will be nothing or simply logic 0.
What is a four input and gate?
A four input and gate is a logic gate with four inputs. The output is true only when all four inputs are true.
Which input combination will produce logic 1 at the output of a 4-input NOR gate?
All inputs hae to be low i.e 0.
Gate input is LOW-ACTIVE?
A LOW-ACTIVE gate input means that the gate's output is activated or enabled when the input signal is at a low voltage level (typically near 0 volts). In digital logic circuits, this characteristic is often seen in components like NAND and NOR gates. For example, a LOW-ACTIVE NAND gate will produce a high output unless all its inputs are low, while a LOW-ACTIVE NOR gate will produce a high output only when all its inputs are low. This behavior is essential for designing logic circuits that respond to specific input conditions.
What is a AND circuit?
An AND circuit is a circuit that takes two or more inputs, and generates an output that is the boolean AND function of those inputs. Two light switches in series, for instance, is an AND circuit because both switches have to be on for the light to be on. If the switches were wired in parallel to each other, and then in series with the light, that would be an OR circuit.
What logic gate might be called the all or nothing gate?
AND gate is an all or nothing gate because in able to have an output of logic 1,all of the input must be all logic 1 or else the output will be nothing or simply logic 0.
What is a four input and gate?
A four input and gate is a logic gate with four inputs. The output is true only when all four inputs are true.
Which input combination will produce logic 1 at the output of a 4-input NOR gate?
All inputs hae to be low i.e 0.
When is that the NA ND logic gate can function as a NOT logic gate?
The NAND gate has two or more inputs, and one output. This output is the complement of the AND of all the bits and will only be 0 if all the inputs are 1.A NOT gate on the other hand has only 1 input, and the output is the complement of this input.So to make a NAND gate into a NOT gate, we should tie (short, connect to same value) all the inputs of the NAND gate. At the output we would have the complement of the signal given at the tied inputs.This way we have a NOT gate from a NAND gate.
Which logic gate has output high if and only if all inputs are low?
NOR - has two or more inputsinverter - only has one input, so that input is all inputs
What are the requirements in creating an input with AND logic gate?
All the inputs of the gate must be set to a logic 1 for the gate to open.
Gate input is LOW-ACTIVE?
A LOW-ACTIVE gate input means that the gate's output is activated or enabled when the input signal is at a low voltage level (typically near 0 volts). In digital logic circuits, this characteristic is often seen in components like NAND and NOR gates. For example, a LOW-ACTIVE NAND gate will produce a high output unless all its inputs are low, while a LOW-ACTIVE NOR gate will produce a high output only when all its inputs are low. This behavior is essential for designing logic circuits that respond to specific input conditions.
Device a circuit to perform OR logic using only NOR gate?
Use two NOR gates. Tie the output of the first to both (or all) inputs of the second. A logic one at any input of the first produces a logic one at the output of the second which is a standard OR.
Which logic gate have output high if and only if all inputs are low?
A nor gate provides an output of 0 when any input is 1.Nor gate provides the opposite of or gate. An or gate provides a 1 or true output when any of the inputs is 1 or true. Therefore the opposite output would be provided by a nor gate.
How can an AND gate be replaced by series switches?
An AND GATE has two inputs that must both be true for the output to be true. If you have two switches in series then they must both be closed for current to flow. This is analogous to having two true signals on the input of an AND GATE.
What is a AND circuit?
An AND circuit is a circuit that takes two or more inputs, and generates an output that is the boolean AND function of those inputs. Two light switches in series, for instance, is an AND circuit because both switches have to be on for the light to be on. If the switches were wired in parallel to each other, and then in series with the light, that would be an OR circuit.
What is NAND gate in semiconductor devices?
A NAND gate is digital logic device which will have 2 or more inputs which can be logic 1 or logic 0 (on or off, high or low) with all the inputs at logic 0 the output will be at logic 1, the only time the output will switch to a logic 0 is when ALL the inputs are at logic 1. here is a simple "truth table" To show the basic operation Input1 Input2 Output Off--------Off------- On Off--------On------- On On--------Off------- On On------- On------- Off NAND stand for not AND therefore a false will be present on the output only when both input are true ANSWER: NAND stands for NOT AND it simply negate the function. The only time that the output can be false if all inputs are true. In logic functions there is no ON-OFF it is either true or false "1" or "0"
