Different devices have saturation currents. For example Transformers and transistors. There is not sufficient information in the question to allow a proper answer.
when ever the external voltage is given the movement of charge carriers produce a current i.e drift current
The degrees (temperature) from the saturated liquid line. One example would be after refrigerant goes through a condenser. T_subcooling = T_sat - T_condenser
It is the current transformer core meant for metering.
A: As base current increases the collector current increases to a point where any more base current will not increases the collector current at hat point the transistor is saturated whereby current may flow in both direction and the two diodes will essentially be in a parallel mode and the voltage drop from emitter to collector will reflect the status as a low voltage drop.
Yes glycerol is saturated in hydrogen. Glycerol is found in both unsaturated and saturated fats and can bond with fatty acids.
Any addition of thermal energy to a saturated liquid will cause it to vaporize. Any subtraction of thermal energy from a saturated vapor will cause it to condense.
The temperature to which air must be cooled to become saturated.
There is no difference between saturated fatty acids and saturated fatty acids. If you meant saturated fatty acids and UNsaturated fatty acids, then the unsaturated ones are the ones with double (or, theoretically, triple) bonds in the carbon chain.
Saturated current refers to the maximum current that can flow through a device, such as a transistor or a diode, when it is fully turned on and all available charge carriers are being utilized. In this state, increasing the voltage further does not significantly increase the current, as the device reaches its saturation point. This concept is important in understanding the operational limits of electronic components in circuits.
What is meant by the term resistivity?
because once saturated it will conduct current both way raja TOQEER (Pakistan)
Fusing current for a wire is the current at which the wire will act like a fuse (melt).
Current flowing through an ac circuit in which power consumed is zero is called wattless current.
In diode some current flows for the presence of the minority charge carriers. This current is known as reverse saturated current. This is generally measured by picoampere. This current is independent of reverse voltage. It only depends on the thermal excitation of the minority carriers
it is down
Expense payable is a current liability.
Busbar current rating for 1 square inch is 1000a.