A Sag Template is a very important tool with the help of which the position of towers on the Profile is decided so that they conform to the limitations of vertical and wind loads on any particular tower, and minimum clearances, required to be maintained between the line conductor to ground, telephone lines, buildings, streets, navigable canals,power lines, or any other object coming under or near the line.
-The tension of the cable (the tighter, the less sag, but this can cause other problems if too tight) -The temperature outside (the higher the temperature, the more it will sag) -The amount of current flowing through the cable (the more current, the hotter the conductor will get = more sag) -The type of cable (aluminimum will sag more than copper; ACSR will sag less than straight aluminimum).
i know someones going to be on this sooooooooo....... they sag because the hydro workers know, from the heat the cbles will sag during the summer, so they start the sag so they cant sag anymore
The plural of sag is sags, not sag's! Sag is caused by the weight of the conductor between its supports, and is (a) unavoidable and (b) necessary to allow for the conductor's expansion and contraction during variations in temperature. When surveyors design a power line, the amount of necessary sag is calculated and built into the design, while ensuring that the clearance between the conductor and the ground remains within safe limits.
The process of creating an object from a class template is called instantiation. During this process, a specific instance of the template is generated by substituting the template parameters with actual types or values. This allows for the creation of objects that can leverage the generic functionality defined in the template, tailored to specific data types.
To calculate the sag of a cushion under weight, you first need to determine the cushion's material properties, such as its stiffness or spring constant (k). Then, apply Hooke's Law, which states that the force (F) exerted on a spring is equal to the spring constant multiplied by the displacement (sag) (F = k * s). By rearranging the formula, you can find the sag by dividing the force applied (the weight of the object) by the spring constant (s = F/k). Measure the weight in newtons and ensure the spring constant is in compatible units to get the sag in meters or inches.
plot of conductor sag and span lengths
sag
SAG
The past tense of sag is sagged.
The sag setting is necessary because it is physically impossible to have a suspended line with no sag. The sag is specified because there has to be a minimum clearance value for the height above ground at the centre of the sag where the cable is at its minimum height.
Sag lasers measure distance.
Ivan Sag was born in 1949.
Not according to the SAG website. Yes they are according to the SAG Website....
The address of the Sag Harbor Whaling Museum is: 200 Main St, Sag Harbor, NY 11963
You can get a SAG membership card upon appearing in a film, and applying for the card. SAG cards can also be awarded to extras, and once dues are paid, the SAG card will be given.
The address of the Sag Harbor Historical Society is: Po Box 1709, Sag Harbor, NY 11963-0062
The address of the Serve Sag Harbor Inc is: Po Box 775, Sag Harbor, NY 11963-0019