answersLogoWhite

0

The picture quality is not that great but here is a drawing of a self biased common collector BJT

http://imageshack.us/photo/my-images/200/selfbiasedcommoncollect.png/

User Avatar

Wiki User

13y ago

What else can I help you with?

Related Questions

Why voltage divider bias is called self bias?

This arrangement is called SELF-BIAS. Now, if an increase of temperature causes an increase in collector current, the collector voltage (VC) will fall because of the increase of voltage produced across the load resistor (RL). ... One of the most widely used combination-bias systems is the voltage-divider type


Why it is named as self Bias of BJT?

The Self Bias of the BJT is also called the voltage divider bias. It is called thus because it can stabilize the collector current, the base emitter voltage and the amplification factor.


What are the different types of biasing technique for amplifier?

Base resistor method (or) Fixed bias methodBiasing with feedback resistor (or) Collector to base bias methodVoltage divider bias (or) Self bias


Why emitter bias circuit is called self bias?

The emitter bias circuit is called self-bias because the bias voltage across the emitter-resistor is based on the transistor's own characteristics. The bias voltage adjusts itself based on the varying collector current to stabilize the operating point of the transistor. It is a self-adjusting mechanism that helps maintain a stable bias point for the transistor.


What is collector feedback?

the bias rsistor is returned back to collector. if temperature increases.


Differentiate fixed bias self bias signal bias?

Base-Current Bias (Fixed Bias) The first biasing method, called BASE CURRENT BIAS or sometimes FIXED BIAS, was used in figure 2-12. As you recall, it consisted basically of a resistor (RB) connected between the collector supply voltage and the base. Unfortunately, this simple arrangement is quite thermally unstable. If the temperature of the transistor rises for any reason (due to a rise in ambient temperature or due to current flow through it), collector current will increase. This increase in current also causes the dc operating point, sometimes called the quiescent or static point, to move away from its desired position (level). This reaction to temperature is undesirable because it affects amplifier gain (the number of times of amplification) and could result in distortion, as you will see later in this discussion. Self-Bias A better method of biasing is obtained by inserting the bias resistor directly between the base and collector, as shown in figure 2-13. By tying the collector to the base in this manner, feedback voltage can be fed from the collector to the base to develop forward bias. This arrangement is called SELF-BIAS. Now, if an increase of temperature causes an increase in collector current, the collector voltage (VC) will fall because of the increase of voltage produced across the load resistor (RL). This drop in VC will be fed back to the base and will result in a decrease in the base current. The decrease in base current will oppose the original increase in collector current and tend to stabilize it. The exact opposite effect is produced when the collector current decreases.


What are the bias conditions base collector junctions for a transistor to operate as a switch?

Reverse bias


Why self bias is known as self?

Self biasind is called self because in this biasing, the variation due to change in temperature increases the the collector current, which hence decreases the output voltage i.e Vout=VCC-ICR and maintains the stability


Which biasing technique is best for amplifier?

The voltage or Potential divider bias or the self bias circuit is the best biasing technique because,it has very low stability factor(change in collector current with respect to Ico or Vbe or current gain beta). only in this technique the increase in temperature wont affect the collector current.


What bias is called self bias?

What? Bias is a one sided opinion


Which stability is greater between self bias and fixed bias?

of course stability of self bias circuit is much greater than fixed bias circuit


What are the different types of biasing?

Fixed Bias,Self Bias, Forward Bias, Reverse Bias