answersLogoWhite

0

A shaft bearing is a low friction support device for a rotating member of a mechanical machine.

User Avatar

Wiki User

10y ago

What else can I help you with?

Continue Learning about Engineering

A support in which a shaft rotates?

Bearing.


When a roller bearing needs to pressed onto a shaft what allowance does the shaft have?

When pressing a roller bearing onto a shaft, the shaft typically has a tolerance or allowance that is slightly smaller than the inner diameter of the bearing to ensure a tight fit. This is often referred to as an interference fit, which ensures that the bearing remains securely in place during operation. The specific allowance can vary based on the bearing size and application, but it is crucial to follow manufacturer specifications to avoid damage to either the bearing or the shaft during installation.


Shaft revolving in a bearing which pair?

If it is ball bearing, it is of higher pair. since the balls in the bearing have point contact with the surface. if it is a journal bearing, it is of lower pair. since the jounal is having surface contact with the shaft. This question refers to the type of pairs in a mechanical joint...


What are the uses of footstep bearing?

A footstep bearing is essentially a cast-iron block with a gunmetal bush that has a hollow collar fitted on its top. This bearing is used to keep the shaft upright in a vertical position. The shaft is fixed in place and not allowed to rotate by a pin.


What is fixed bearing?

Due to temp. variation the shaft will expand axially, to accept this expansion only one bearing on the shaft is fixed axially in the housing, are called Fixed Bearing. It can also mean that an object is at a steady angle away from another object

Related Questions

How do you find diameter of a shaft when bearing no is given?

How do you find dia meter of shaft when bearing no is given?


What is the difference between a fixed and a floating bearing?

floating bearing allows axial movement of the shaft. fixed bearing does not allow for axial movement of the shaft


What is a center bearing?

That is a bearing in the centre of a crankshaft or drive shaft.


What is friction bearing?

A friction bearing is a solid bearing that directly supports the end of an axle. Friction is when the bearing and the joint are running together.


How do you remove a frozen bearing race from the shaft?

Use a die grinder with a cutoff wheel and cut the race in half taking care not to touch the shaft. If the bearing race spun on the shaft and froze on to the shaft chances are the shaft is damaged.


A support in which a shaft rotates?

Bearing.


When a roller bearing needs to pressed onto a shaft what allowance does the shaft have?

When pressing a roller bearing onto a shaft, the shaft typically has a tolerance or allowance that is slightly smaller than the inner diameter of the bearing to ensure a tight fit. This is often referred to as an interference fit, which ensures that the bearing remains securely in place during operation. The specific allowance can vary based on the bearing size and application, but it is crucial to follow manufacturer specifications to avoid damage to either the bearing or the shaft during installation.


How do you find diameter of shaft through bearing number?

To find the diameter of a shaft through a bearing number, refer to the manufacturer's bearing catalog or specification sheet. Look for the bearing's bore size, which represents the inner diameter of the bearing. The shaft diameter should match the bore size to ensure proper fit and functionality.


How do you remove a drive shaft carrier bearing on a 1985 ford f150?

to remove carrier bearing, u will need to removbe the drive shaft from the vehicle the carrier bearing is bolted to chassis with 2 bolts . these will need to be removed and the carrier and bearing will come out with the drive shaft one drive shaft is out you can then knock old bearing and carrier off of shaft with a hammer. the old carrier is no good so doesnt matter if you trash it once you get old one off, carefully known new one onto shaft until seated,being careful to note which is front of carrier bearing you can then reinstall cariier bearing and drive shaft to truck. NOTE: now is a good time to check and replace if needed the U-Joints on the drive shaft


Bearing on drive shaft of Camry 1998?

What about it?


How long is front drive shaft in 1963 Impala with 2 piece carrier bearing drive shaft OEM?

there is no front shaft in 63 impala Wrong answer, it's about two feet from the transmission to the carrier bearing


What is the difference between axial bearing and radial bearing?

In axial bearing the most power force in the same direction as the axis of the shaft In radial bearing no.