0
What else can I help you with?
What is advantage of software reusability?
What is advantage of software reusability?
What is the advantage of using PLM?
What is the advantage of using an PLM
What is the mechanical advantage of a ramp What is the mechanical advantage of a ramp standing straight up?
The mechanical Advantage is FORCE TIMES DISTANCE
What are some ideal mechanical advantage examples?
Mechanical Advantage = Effort/Load
What is the mechanical advantage of 775?
775 is a number, not a machine. It, therefore, has no mechanical advantage.
What is the function of optoisolator?
It means when you get your hole . BMC
What is the function of MCT2E optoisolator?
It means when you get your hole . BMC
WHAT IS EACH INPUT AND OUTPUT PRT CONNECTED TO THE CPU THROUGH AN OPTOISOLATOR CHIP SUCH AS THE 4N32?
In a system using an optoisolator chip like the 4N32, each input typically connects to the LED side of the optoisolator, allowing the input signal to control the LED, which is isolated from the CPU. The output side, which consists of a phototransistor, interfaces with the CPU by switching based on the input signal's LED activation. This configuration provides electrical isolation between the CPU and the input signals, protecting the CPU from voltage spikes or noise. Overall, the input signal triggers the optoisolator, and the output signal relays this information to the CPU.
What is the actual use of moc3011?
When people build systems that automatically turn on and off light bulbs and other mains-powered devices, they typically use a microcontroller to decide when to turn things on and off. Alas, microcontrollers cannot be directly connected to mains power. So these people typically build a system to allow the microcontroller to indirectly turn on and off the light bulbs: First, the microcontroller turns on (or off) a small LED inside an optoisolator, when turns on (or off) the silicon switch inside the optoisolator, which turns on (or off) a triac. The triac acts just like a light switch, turning on (or off) the light bulbs or other mains-powered devices attached to it. The MOC3011 triac driver optoisolator is often used in such applications.
How do you make a driver circuit for an optoisolator?
All you need to do is provide enough bias current thru the diode, usually less than 20 mA. Find a datasheet and look at the bottom for recommended circuits.
What is the Advantage and dis advantage of flow chart?
What is the Advantage and dis advantage of TCP/IP
What is the abbreviation of advantage?
advantage
What is virtual advantage?
advantage
What is the advantage of an oralism the advantage of a manualist?
what is the advantage & disadvantages of folk media
What are Dis advantage of multinational?
What are Dis advantage of multinational?" What are Dis advantage of multinational?"
What are the advantage of kaspersky antivirus?
no advantage
What is the advantage of bamboo?
what is advantage of bamboo?
