The change of collector current with respect to emitter current.
Typically 0.95 to 0.995. So a transistor with alpha of 0.95 might have an emitter current of 10 mA, collector current 9.5 mA.
The "missing" current becomes base current and does not reach the collector.
The more commonly used figure for current gain is beta, the ratio of collector current to base current, typically 50 to 500.
In CB MODE
It is called the common base, short-ckt, amplification factor.
The BJT is the bipolar junction transistor, the PCT is the point contact transistor, the UJT is the uni-junction transistor, the SBT is the surface barrier transistor, the FET is the field effect transistor, the GJT is the grown-junction transistor, the AJT is the alloy-junction transistor, and the DFT is the drift field-junction transistor.
Ie=Ic+Ib
no, 2 junctions. NPN or PNP
By testing the C B E terminals.
BJT is Bipolar junction transistor FET is Field effect Transistor It is a current controlled device It is voltage controlled device
In the case of Bipolar Junction Transistor current conduction is due to both holes and electrons. That's why noise is high in Bipolar Junction Transistor
Transistor is known as bipolar junction becoz it has 2 pole. Input is given to the 2 junction and output is taken from to junction
Yes, the are different names for the same thing.
alpha is the common base current gain = Ic/Ie.beta is the common emitter current gain = Ic/Ib.
through the used of multi-tester
amplifier, switch, oscillator, etc.
Unless it is some leet speak term I am not aware of, BJTstands for Bipolar Junction Transistor or (less common) Business Japanese Proficiency Test.
The BJT is the bipolar junction transistor, the PCT is the point contact transistor, the UJT is the uni-junction transistor, the SBT is the surface barrier transistor, the FET is the field effect transistor, the GJT is the grown-junction transistor, the AJT is the alloy-junction transistor, and the DFT is the drift field-junction transistor.
Bipolar junction transistor(BJT)
Ie=Ic+Ib
Yes people still use bipolar junction transistors today because of its high switching speed.
A circuit in which the input signal is applied to its base and the collector is earthed (grounded) is known as common collector configuration of BJT (BiPolar Junction Transistor)