The approximate range of skin contact resistance typically varies from about 1,000 to 100,000 ohms, depending on factors such as skin condition, moisture, and pressure applied during contact. Dry skin generally has higher resistance, while wet or damaged skin can significantly lower resistance. This variation is important in contexts like electrical safety and bioelectrical measurements.
Zero to 100 ohms.
An ohm is a unit of electrical resistance. A kilohm is 1,000 ohms resistance, while a megohm is 1,000,000 ohms resistance.
The range of armature resistance in a DC motor typically varies from a few ohms to several tens of ohms, depending on the motor's size and design. Smaller motors may have armature resistances as low as 1-5 ohms, while larger industrial motors can have resistances ranging from 10 to 50 ohms or more. The resistance affects the motor's efficiency and performance, particularly in terms of voltage drop and heat generation during operation.
Your question is incomplete. What you meant to say is "What is the voltage drop of a 1.2K Ohm resistance?" (an Ohm is a unit of measurement, a resistor or resistance is measured in ohms.) The answer is, it depends on the current flowing through the circuit. Use the formula V=IR where V is the voltage, I is the current in amps, and R is the resistance in ohms.
Electrical resistance is measured in Ohms.
30 micro ohms
this is range of 4 ohms resistance in an electrical device. Ohms is a measure of resistance in electrical qualities. Circuits and devices are rated , or measured for there resistance in ohms to meet a designed electrical need. Is this related to a speaker?
Zero to 100 ohms.
0 Ohms empty, 90 Ohms full.
400mega ohms acceptable....
5 megohms
The resistance of the circuit is measured in ohms.
The number of ohms is, precisely, the value of the resistance.
The resistance of the circuit is measured in units of ohms.
An ohm is a unit of electrical resistance. A kilohm is 1,000 ohms resistance, while a megohm is 1,000,000 ohms resistance.
It really depends on what you are trying to get the resistance of. A piece of copper wire 30 feet long will only have a resistance of few ohms. A person can have a resistance of several million ohms. Making sure that your meter's leads are in good contact with whatever you are measuring is the best way to get an accurate reading.
The base unit of resistance is measured in ohms.