0
What else can I help you with?
Does a low bandwidth signal have more power than a high bandwidth signal?
A low bandwidth signal does not have more power.
What is the general purpose of a bandwidth meter?
It measures the bandwidth, or amount of data, which a user has used. This is useful for companies which have limits to the amount of bandwidth they have sold, or who sell bandwidth at a price per gigabyte.
What happen if the bandwidth of signal greater than channel bandwidth?
distorttion
Where can one measure how much bandwidth they are using?
A simple search of the net will find there are many bandwidth monitoring sites that are available for free. A popular one is callled Free Meter Bandwidth Meter. You also can use WFilter freeware for network bandwidth monitoring.
What does bandwidth compression mean?
Bandwidth compression is a term used in telecommunication, and it has two meanings. The first meaning of the term states that bandwidth compression is the reduction of bandwidth needed to forward a specific amount of data in a specific amount of time. The second meaning states that bandwidth compression is the reduction of time needed to forward a specific amount of data in a given bandwidth.
What is a trunk Port?
A trunk port is a port on a switch that can be assigned to carry multiple VLANs across switches or increase overall bandwidth/throughput.
What is Trunk link?
Point to Point connecting to a switchMultiple VLAN’sA high bandwidth data channel
How many physical interfaces are required to perform inter-VLAN routing with traditional inter-VLAN routing?
In traditional inter-VLAN routing (also known as "router-on-a-stick"), only one physical interface is required on the router. However, this single physical interface needs to be configured with multiple sub interfaces, each corresponding to a different VLAN. The router uses these sub interfaces to route traffic between VLANs. The configuration involves: One physical interface on the router (e.g., GigabitEthernet0/1). Multiple sub interfaces (e.g., GigabitEthernet0/1.10, GigabitEthernet0/1.20) corresponding to different VLANs. Each sub interface is assigned an IP address in the respective VLAN's subnet. This setup enables inter-VLAN routing by allowing the router to route traffic between the VLANs using a single physical interface.
What is a router on stick inter vlan routing?
A physical router device with an interface that routes between two or more VLANs that are attached to a VLAN network segment by a trunk link. In other words a " router on a [ TRUNK ] " which is originating from switches with independent non routing VLANs.
How do you program vlans on a switch?
how to prgram vlans on a switch
What is the difference between vlan and inter-vlan?
VLAN is a group of hosts with a common set of requirements that communicate as if they were attached to the same broadcast domain, regardless of their physical location. Inter VLAN is defined as two VLANS connected to each other and communicating.
Advantages and disadvantages of inter-vlan routing?
Advantages are that it is simple to implement, A Layer-3 switch (expensive) is not required, The router provides communication between VLANs.
What bandwidth do traditional modems use to transmit data?
2400 Hz
What distinguishes traditional routing from router-on-a-stick?
Router on a stick usually just routes between VLANs and has only 1 actual interface.
Describes a network link that carries the traffic of multiple VLANs?
all VLANs
Switches can create by grouping a number of ports into a broadcast domain?
VLANs.
How many VLANs can there be on a Catalyst 2600 series switch?
totally 1005 vlans we can create
