A: Extremely important since at the level there is infinite current available at zero volts, In reality it can never be ac hived but it can be assumed for consideration
Each piece of hookup wire can be thought of as a zero-ohm resistor. In fact even the hookup wire has resistance but it's so small it it can be neglected.
No, an open resistor has a value of infinity. An open resistor typically will measure over 900 Megohms. A zero ohm resistor is exactly that, and will measure zero ohms. They are typically surface-mount devices.
I don't see a question. Please clarify if you want an answer.
Rt = 10
You need to calculate the equivalent resistance. For instance, if the three resistors are connected in series, simply add all the resistance values up. Then, you calculate the current (in amperes) using Ohm's Law (V=IR); that is, you need to divide the voltage by the resistance.
No such resistor exists. Any resistor placed in parallel with a 6.0 ohm resistor is going to reduce the combined resistance below 6.0 ohms.
A zero-ohm resistor does not exist, so we are talking about an ideal resistor. An ideal resistor is needed for description in a circuit, where we lump all wire/parasitic resistances into discrete resistors, but the wire joining two discrete resistors is considered to have no resistance. My definition: a zero-ohm resistor is an ideal resistor that does not consume energy when a current exists in the resistor. Alternatively, a zero-ohm resistor is an ideal resistor that cannot sustain any potential drop when a current is on. Thirdly, a zero-ohm resistor is an ideal resistor that will conduct an infinite current when a voltage is applied across it.
Why would you buy something that does absolutely nothing? If you need a "zero ohm resistor", just don't connect any resistor at all.Why would you buy something that does absolutely nothing? If you need a "zero ohm resistor", just don't connect any resistor at all.Why would you buy something that does absolutely nothing? If you need a "zero ohm resistor", just don't connect any resistor at all.Why would you buy something that does absolutely nothing? If you need a "zero ohm resistor", just don't connect any resistor at all.
A zero ohm resistor is a piece of wire with a resistor body. It is essentially a jumper. It is useful when a jumper is need on a printed circuit board that is assembled by automated machinery, because the automated machinery can handle resistor insertion far easier than a jumper wire. The color coding on a zero ohm resistor is one single black band.
No, an open resistor has a value of infinity. An open resistor typically will measure over 900 Megohms. A zero ohm resistor is exactly that, and will measure zero ohms. They are typically surface-mount devices.
The current would be about 20 volts.
1amp
3
No, a 2.2k ohm resistor and a 220 ohm resistor are not the same resistance. The "k" in 2.2k ohm stands for "kilo," which represents a multiplier of 1000. Therefore, a 2.2k ohm resistor is equivalent to 2200 ohms, while a 220 ohm resistor is simply 220 ohms. The difference in resistance values is a factor of 10 due to the kilo prefix.
To find the current through the 40 ohm resistor, first calculate the total resistance of the parallel circuit: 1/Rt = 1/120 + 1/60 + 1/40. Then, calculate the total current using Ohm's Law, I = V/Rt. Finally, use the current divider rule to find the current passing through the 40 ohm resistor.
I don't see a question. Please clarify if you want an answer.
2
To calculate the total current in the circuit, you first need to find the total resistance by using the formula for resistors in parallel: 1/Total Resistance = 1/120 + 1/60 + 1/40. Once you have the total resistance, you can use Ohm's Law: Current = Voltage / Total Resistance. Finally, to find the current running through the 40 ohm resistor, you divide the total current by the resistance of the 40 ohm resistor.