Please re-write that in simple form so we can understand. Don't try to make the longest sentence that you can.
because large slabs of concrete have expansion joints between them.
Two-way slabs are rectangular reinforced-concrete slabs that are supported on all sides. The reinforcement is placed perpendicular to the sides.
18
25
You could, but then you might risk causing damage to the new paving slabs, or exacerbating drainage issues. I would go ahead and remove the old slabs as these are usually just laid in with plain sand between them. Even if it's cement, I'd hate to have to do it over.
Depends on the linear dimensions of both the slabs and the ground.
In a normal fault, rock slabs are being pulled apart due to tensional forces, leading to the upper block sliding down along the fault plane in relation to the lower block.
First, the large quarry block is cut into smaller, more manageable pieces using a saw. These pieces are then shaped into rough slabs using a gang saw or wire saw. Next, the rough slabs are polished using a combination of grinding and polishing machinery to achieve a smooth and glossy finish.
It is used to "block" the opening in walls and slabs during concrete pouring. This is usually made of wood or styrofoam.
Termites burrow into concrete block walls. Termites live in many types of structures. In addition to walls they also live in baseboards and slabs.
bacon.
Non suspended concrete slabs sit on the ground directly. They are different from suspended slabs because suspended slabs are above the ground and are supported by beams.
48+ breakages
It allows for the expansion of the concrete during hot weather and provides a water block during rains and that prevents water freezing (and expanding) during the winter. Ice expanding in those cracks would damage the cement slabs.
The answer will vary slightly depending on assumptions: will the slabs have a space between them, and will you be cutting the slabs to fill fractions. 21 feet is equal to 14.2 of the 450 mm slabs. 19 feet is equal to 12.9 of the slabs. To complete the rectangular area, 14.2 x 12.9 = 183 slabs.
220 should do it.
40 slabs