0
What characteristics are you looking for? At full load, a synchronous generator will be spinning at synchronous speed, providing real power (watts), and likely some reactive power (vars), or it may be taking reactive power from the system to help hold the system voltage down under light loading conditions.
What else can I help you with?
What is the full load amps of a generator that is 300 kw and is 375 kva?
Full load amps for a three phase, 375KVA generator is 375 / (voltage in kV) / sqrt(3).
What is voltage regulation of synchronous generator?
The volatge regaulation be calculated by calculating the percentage difference between volatge at no load and voltage at full load
How to compute the minimum load of 16 MW generator?
A generator, rated at 16 MW, should be able to continuously supply a load of 16 MW. You don't need to compute its 'minimum load', because the minimum load will be zero watts! In other words, you can run the generator with no load whatsoever if you wish to waste fuel.The point is that the power supplied by a generator is determined by the load, NOT by the generator itself -so it is important that the generator is capable of supplying the maximum load applied to it. A generator's 'rated power output' simply tells us the maximum load it is capable of supplying.
What is the full load current of 200kW 380V 3-phase generator with 0.8 lagging power factor?
304 Amperes
What is the fuel consumption of a 30 KVA Perkins generator at full load?
The Perkins 100 KVA generator uses approximately 23.8 Liters per hour. The Perkins KVA generator can be purchased at any Perkins licensed dealer.
What is the full load amps of a generator that is 300 kw and is 375 kva?
Full load amps for a three phase, 375KVA generator is 375 / (voltage in kV) / sqrt(3).
What are the characteristics of dc shunt generator?
The open-circuit characheristics and the load characheristics
What is the load rejection and load pick-up in the power generation?
Load rejection occurs when load is suddenly removed from the generator. The most obvious example of this is the breaker connecting the generator to the power grid opens. This results in a full load rejection. Load pick up means the generator is supplying power to a given load. When a generator comes on line, it will pick up some load that might have been supplied by another generator.
What is the full load of 35 kva diesel generator?
35 kV.A.
What is the fuel consumption of 1250 kva diesel generator on full load?
The fuel consumption of a 1250 kVA diesel generator at full load typically ranges from 200 to 250 liters per hour, depending on the generator's efficiency and the specific diesel engine model. Generally, a common estimation is that diesel generators consume about 0.25 to 0.3 liters of fuel per kWh produced. Therefore, the exact consumption can vary based on factors such as load characteristics and maintenance conditions.
Theory for load test on dc shunt generator?
load test on dc shunt generator is a test to plot the internal and external characteristics of the generator.
How much fuel does a 50 kva diesel generator consume at full load?
8
How many hours can a Coleman generator be used on a full tank of gas?
Actually this question can not be answered since the actual time mainly depends on the load attached to the generator. If running idle (i.e. no electrical load connected) it will run significantly longer than with full load connected.
What is the diesel consumption of kirloskar silent generator 25kva?
6.3 liters/hour at full load
What is voltage regulation of synchronous generator?
The volatge regaulation be calculated by calculating the percentage difference between volatge at no load and voltage at full load
How is a Load applied to a ac generator?
The load conductor is connected to the load side of the generator breaker. Once the generator is up to speed the load breaker is closed and the voltage is then applied to the load.
How many alternator generator turbines will it take to run a full household?
It depends on the total connected load (KW) of the house. If the total connected load is about 20 KW the alternator generator should be designed to meet peak 20 kw load
